Maytag Dishwasher Error Code PF

PF stands for Power Failure on a Maytag dishwasher. It appears in the display after the control board detects a power interruption lasting longer than approximately 5 seconds. It is an informational indicator, not an error indicating a broken component. Pressing any cycle or options pad, or unlatching the door, will clear it.

Yes, the PF display is cleared by pressing any cycle or options button on the control panel or by opening the door. You do not need to perform a full control reset or disconnect power to the unit. If a wash cycle was in progress when the power went out, you will need to start a new cycle manually to ensure your dishes are properly cleaned.

In most cases, a PF code costs nothing to resolve since it only requires pressing a button to clear it. If repeated PF codes are traced to a failing control board, replacement board costs plus labor typically range from $150 to $350 depending on the specific model and local service rates. Wiring repairs, if needed, are generally less expensive than a board replacement.

To clear the PF code, simply press any cycle or options pad on the control panel or unlatch the door. No tools or repairs are required for a standard PF display. If the code reappears frequently without any known power outages, check for a tripped breaker, loose wiring connections, or a GFCI outlet that may be cutting power intermittently.

Yes, it is safe to use the dishwasher after a PF code. The indicator simply means power was interrupted and is not a warning about any electrical or mechanical hazard within the appliance. Clear the code and run a fresh cycle if dishes were being washed at the time of the outage.