Maytag Washer Error Code 60

Error code 60 on a Maytag washer signals a heater relay failure or a condition where the relay contacts have become stuck. The relay is the switching component that controls power to the wash heater element. When the control detects the relay is not functioning correctly, it stops the cycle and displays this code to prevent overheating or damage.

It is not recommended to continue operating the washer with error code 60 present. A stuck closed relay means the heater could be energized at the wrong time, creating a risk of overheating. A stuck open relay means the heater cannot function at all, and running cycles will not produce correct results. Resolve the fault before resuming normal use.

If only the wiring connections need to be cleaned or reseated, the repair cost may be minimal. If the relay itself needs replacement, parts typically range from around $10 to $60 depending on the specific component. If the control board is at fault, board replacement can range from $100 to $300 or more for parts alone, with additional labor costs if a technician performs the repair.

Start by unplugging the washer and inspecting the wiring and connectors at the heater relay for corrosion, looseness, or burn marks. If the connections are in good shape and the relay itself tests faulty, the relay will need to be replaced. This is a repair that requires comfort working with electrical components, and if you are unsure, a qualified technician should handle it.

A reset may temporarily clear the code from the display, but if the underlying relay or wiring fault is still present, the code will return once the washer attempts to use the heater again. A reset is not a fix for this error and the root cause must be addressed to resolve it permanently.