Maytag Washer Error Code FCE3

FCE3 indicates a Wi-Fi connection fault on a Maytag washer. The machine's smart connectivity module has lost or cannot establish a wireless connection. This does not prevent the washer from running cycles, but smart and remote-control features will not work until the fault is resolved. The cause can range from a router issue to a failed internal Wi-Fi module.

No, FCE3 is not a safety-related fault. It only affects the wireless communication features of the washer, such as app connectivity and remote monitoring. The washer will continue to operate normally for all standard wash, rinse, and spin functions. You can safely continue using the machine while troubleshooting or waiting for a repair.

If the fix is network-related, there may be no parts cost at all. A replacement Wi-Fi communication module typically costs in the range of $30 to $100 for the part. If professional repair service is needed, labor charges will add to that cost depending on local rates. Replacing the main control board, if required, is significantly more expensive and generally falls in the range of $150 to $350 or more for parts alone.

Start by checking your home Wi-Fi router to confirm it is online and broadcasting a 2.4 GHz network within range of the washer. Restart both the router and the washer and attempt to reconnect through the app or control panel. If the error persists, inspect the Wi-Fi module harness inside the washer for loose or damaged connectors. If all connections are secure and the network is confirmed compatible, the Wi-Fi module may need to be replaced.

A reset may temporarily clear the FCE3 code, but the error will return if the underlying cause is not resolved. If the fault is caused by a temporary network dropout, a reset combined with restoring the Wi-Fi connection may clear it permanently. If the Wi-Fi module or harness is faulty, the code will reappear after the reset. Address the root cause before relying on a reset to clear the code.