mypros+
Error code reference

Samsung Refrigerator Error Code 29E

Ice Room sensor error

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 29E error code actually means

Your Samsung refrigerator is displaying the 29E error because the sensor that monitors the temperature inside the ice maker section is not reading correctly or is not communicating with the control board. This usually means a wiring connection has come loose, a wire is damaged, or the sensor itself has failed. The ice maker may stop working properly until this issue is resolved.

Diagnostic procedure

The full 29E procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check voltage between Main PCB CN30 pins 8 and 9; should be within 4.5V~1.0V range.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 29E procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 29E

Ranked by how often they cause this code
  1. 1Disconnected or loose sensor connector
  2. 2Damaged or cut wiring harness
  3. 3Failed ice room temperature sensor
  4. 4Short circuit in the sensor wiring
  5. 5Main PCB fault at CN30

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 29E

What does 29E mean on a Samsung refrigerator?
The 29E code on a Samsung refrigerator indicates an ice room temperature sensor error. The control board is detecting a sensor reading outside the valid range, which can be caused by a disconnected connector, a cut or shorted wire, or a failed sensor. The diagnostic starting point is checking the voltage at pins 8 and 9 of connector CN30 on the Main PCB, which should read between 1.0V and 4.5V.
Is it safe to use my refrigerator while the 29E code is showing?
The main food storage sections of the refrigerator should continue operating normally during a 29E fault, so food safety is generally not an immediate concern. However, the ice maker function may be impaired or disabled while the sensor circuit is faulted. It is best to address the error promptly to prevent any secondary effects on ice production or the ice room components.
How much does it cost to repair a Samsung refrigerator 29E error?
Repair costs vary depending on the root cause. If only the sensor needs replacement, parts typically range from $15 to $60, and a DIY repair involves minimal additional expense. If a wiring harness or Main PCB replacement is needed, costs can rise to $150 to $400 or more including professional labor. Getting a diagnostic visit from a certified technician usually costs between $75 and $150, which is often applied toward the repair total.
Can I fix a Samsung 29E error myself?
Some causes of the 29E error are accessible to a confident DIYer. Checking and reseating the sensor connector requires no special tools and should be the first hands-on step after the voltage check. Replacing the ice room sensor itself is also a straightforward repair once the correct part is sourced. However, if the fault involves wiring harness damage or a Main PCB failure, professional repair is recommended.
Will resetting my Samsung refrigerator clear the 29E error?
A power reset may temporarily clear the 29E code from the display, but the error will return if the underlying sensor circuit fault is still present. Resetting is useful to confirm whether a fault is persistent or intermittent, but it does not repair a damaged connector, broken wire, or failed sensor. A proper diagnosis of the sensor circuit is needed to resolve the error permanently.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass