Samsung Washer Error Code door

The door error code on a Samsung washer means the machine has detected that the door is not properly closed or latched. The washer requires a confirmed door closure signal from the door latch assembly before it will run a cycle. The error is a safety feature to prevent the washer from operating with an unsecured door.

A reset alone will not clear the door error if the underlying issue is still present. The control board will continue to display the error as long as it does not receive a valid closed-door signal. You must resolve the physical or electrical cause first, such as properly closing the door or repairing the latch, before the error will go away.

If the fix is simply closing the door properly, there is no cost involved. Replacing a door latch assembly or door switch typically costs between $15 and $80 for the part, depending on the specific model. Adding professional labor, the total repair cost generally falls in the range of $100 to $250.

Start by firmly pressing the door closed until you hear a click, then try restarting the washer. Check the door gasket for any clothing or debris that might be blocking a full seal. If the error continues, inspect the door latch assembly and door switch, as one of these components may need to be replaced.

No, you should not attempt to bypass or ignore the door error. The washer is designed to prevent operation when this error is active specifically to avoid water leaking from an unsecured door during a cycle. Running the machine with a faulty door latch also poses a risk of the door opening mid-cycle.