Whirlpool Washer Error Code F68

F68 is a saved fault code indicating a primary control failure on a Whirlpool washer. It falls within the F60 to F68 fault range, all of which relate to the machine control assembly. The washer's control board has detected an internal failure it cannot recover from and has logged this code to memory. Replacing the machine control assembly is the recommended corrective action.

F68 is a saved fault code, meaning it is stored in the control board's memory and will persist through power cycles and resets. Simply unplugging the washer or cycling power will not clear this code or resolve the underlying fault. The issue must be corrected by replacing the machine control assembly before normal operation can resume.

The cost to repair F68 depends primarily on the price of the replacement machine control assembly, which typically ranges from around 150 to 350 dollars for the part alone depending on the specific model. If you hire a technician, labor costs will add to the total, generally bringing the repair into the 250 to 500 dollar range. It is worth comparing the repair cost against the age and overall condition of the washer before proceeding.

A technically capable DIYer can replace the machine control assembly, but it requires comfort working with electrical components and disconnecting wiring harnesses. Before replacing the board, check all wiring harness connectors at the control assembly for corrosion or damage, as a loose connection can occasionally trigger persistent fault codes. If connectors are in good condition, the control board itself will need to be replaced.

It is not recommended to continue using the washer while F68 is active. A primary control failure means the machine control assembly is not functioning correctly, which can result in unpredictable behavior during the wash cycle. Running the washer in this condition could potentially cause additional damage to other components or create safety concerns.