Model reference
Amana YY-120-B3
Furnace
4 documents42 error codes4 service modes
Available documentation
Tech Sheet
- Tech Sheet - 97613898 pg
Installation Guide
- Installation Instructions20 pg
- Installation Instructions20 pg
- Installation Instructions80 pg
MyPros+ Max
Diagnose your Amana YY-120-B3.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (42)
CodeMeaning
F0E0No failureF1-E0EEPROM communications error.F1-E1EEPROM checksum failure.F1-E2UL A/D error(s).F1E0Internal error (display board related).F1E1Internal error (display board related).F1E2Internal error (display board related).F1E3Internal error (display board related).F1E4Internal error (display board related).F1E5Internal error (power board related).F1E6Internal error (power board related).F1E7Internal error (power board related).F1E8Internal error (power board related).F1E9Internal error (display board related).F2-E0Shorted key.F2-E1Keytail unplugged.F2E0Stuck key (shorted key) on keypad.F2E1Keypad disconnected.F3-E0Oven sensor opened.F3-E1Oven sensor shorted.F3-E2BAKE/BROIL range over temperature.F3-E3CLEAN range over temperature.F3E0Main oven temperature sensor open (top oven sensor opened).F3E1Main oven temperature sensor shorted (top oven sensor shorted).F3E2Meat probe sensor shorted.F3E4Bottom oven temperature sensor open (bottom oven sensor open).F3E5Bottom oven temperature sensor shorted (lower oven sensor shorted).F3E6Warming drawer temperature sensor open.F3E7Warming drawer temperature sensor shorted.F4E2Over temperature during cook mode.View all 42 error codes
F4E3Over temperature during clean mode.F4E7Over temperature cavity 2 (temperature runaway error).F5-E0Door and switches do not agree.F5-E1Door latch not operating.F5-E2Latch error during CLEAN.F5E0Door latch mismatchF5E1Latch not operating (no operating latch).F5E2Door switch fault.F5E4Latch switch fault.F5E7Unlock door errorF6E4Lost communication between power board and display board.F6E5Cancel key error.
Service modes (4)
- Diagnostic mode["Press the Cancel key to place the range in an idle state.","Press the Cancel and Start keys in…
- Hidden EOC FunctionsPress and hold the appropriate key for 5 seconds to activate each hidden function. Functions…
- Recall Last Failure CodePress and hold OFF/CANCEL key for 5 seconds until last error code is displayed.
- Temperature Calibration Adjustment1. Press and hold BAKE pad for 5 seconds. Current offset (if any) is shown in 3-digit display; CAL…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Amana furnace models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass