Model reference
Bosch ZBD6605G00
Dishwasher
2 documents10 error codes3 service modes
Available documentation
Service Manual
- Service Information ZBD6600/66052 pg
- Service Information ZBD6600/66052 pg
MyPros+ Max
Diagnose your Bosch ZBD6605G00.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (10)
CodeMeaning
Not drainingDishwasher did not drain within 5 minutes.Not fillingDishwasher did not fill after selected fill line was reached/expected.Not HeatingWater temperature rose less than 9°F in 15 minutes during wash cycle.Open or short circuit Door thermistor (Normal & Heat Dry)Temperature sensed was below 32°F or above 210°F on the door thermistor.Open or short circuit Door thermistor (Normal/Normal)Temperature sensed was below 32°F or above 210°F on the door thermistor.Oven TemperatureWater temperature sensed was greater than 180°F but less than 210°F.OverfillLeak detection switch closed or 2nd level pressure switch activated.Turbidity Sensor High SignalTurbidity sensor count was greater than 65,279 in 0.4 seconds.Turbidity Sensor No Signal & Low SignalTurbidity sensor counter did not receive pulses from sensor, or count was less…Turbidity Temp SensorTurbidity temperature thermistor was shorted, open, or constant.Service modes (3)
- Fault Code Detection["Ensure the dishwasher is in standby (off) with no program LEDs on.","Align the wash cycles and…
- Field Test Cycle["Ensure the dishwasher is in standby (off) with no program LEDs on.","Align the wash cycles and…
- Relay/Triac Test["Align the wash cycles and heat options indicators on the knobs with the Start/Cancel…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Bosch dishwasher models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass