mypros+
Model reference

Electrolux EIDW6105GS0/1

Dishwasher

4 documents16 error codes17 service modes

Available documentation

Service Manual

  • Technical Service Manual Built-in Dishwasher104 pg
    Covers this model
  • Technical Service Manual Built-in Dishwasher104 pg
    Covers this model

Other

  • Use & Care Guide - Built-In Dishwasher72 pg
    Covers this model
  • Error Code Booklet74 pg
    Covers this model
MyPros+ Max

Diagnose your Electrolux EIDW6105GS0/1.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (16)

CodeMeaning
CLFlashes once the program has been entered and START/CANCEL is pressed, or if…Er 01Leak DetectorEr 02Thermistor/turbidity module failure.Er 03Wash PumpEr 04Drying DamperEr 05Upper FanEr 06Lower FanEr 07Drain ValveEr 08Tactile or Touch SwitchEr 09CommunicationsEr 10Main RelayEr 11Drain ValveEr 12Drain ValveEr 13System FailureHDFlashes to indicate a water heat delay.PFAppears when dishwasher is first installed or when power has been interrupted.

Service modes (17)

  • Acceptance Test - B/C ControlPress 'Favorite' and 'Auto Wash' together
  • Acceptance Tests - A ControlPress '<' and '>' simultaneously
  • C-Relay Test - A ControlPress 'Delay Time' and 'Set' keys
  • Continuous Wash Mode - A ControlSimultaneously hold 'Delay Time' and 'Set' keys during power-up to enter diagnostics
  • Demo Mode - A Control1
  • Disable Display - A ControlPress and hold the left arrow for 10 seconds
  • Discrete Relay/Triac and Sensor Test - A ControlPress 'Delay Time' and 'Set' keys simultaneously
  • Discrete Relay/Triac and Sensor Test - B/C ControlPower on or reset the machine and within 15 seconds hold simultaneously 'Sanitize' and 'Delay'
  • Display Water Temperature and Turbidity Voltages Test Mode - A ControlSimultaneously hold 'Delay Time' and 'Set' keys during power-up
  • Display Water Temperature and Turbidity Voltages Test Mode - B ControlPress 'Sanitize' and 'Delay Start' simultaneously
  • Engineering Tests - A ControlPress 'Set' and 'Delay Start' keys simultaneously
  • Engineering Tests - B, C and Panel Ready ControlPress 'Sanitize' and 'Delay Start' simultaneously. 'Et' is displayed. Then press specific cycle…
  • Locking the ControlPress and hold the AIR DRY button for 3 seconds when the door is latched.
  • Software Version - A ControlSimultaneously hold 'Delay Time' and 'Set' keys, then select the software ID test option.
  • Software Version - B/C ControlSimultaneously hold 'Delay' and 'Sanitize' keys
  • Water Service Test - A Control (From Idle Mode)Simultaneously press the 'Wash Cycles' and 'Delay Time' keys for three seconds
  • Water/Service Test - B/C Control (From Idle Mode)Simultaneously press the 'Heavy' key (B & C models) and the START/CANCEL keys for three seconds

Full entry steps, exit procedures, and test sequences are available in Max.

Related Electrolux dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax