Electrolux Dishwasher Error Code Er 06

Er 06 means the control board did not receive a proper speed feedback signal from the lower fan during the drying cycle. The dishwasher monitors fan rotation to confirm the drying system is working correctly. When that signal is missing or out of range, the error is triggered. The drying function may be reduced or disabled as a result.

The dishwasher may still complete wash cycles with Er 06 active, but the drying performance will likely be compromised. There is no immediate safety hazard from the error itself, but running the unit repeatedly with a failed or obstructed fan motor could risk further damage to the motor or related components. It is best to diagnose the fault before continued heavy use.

Repair costs vary depending on the cause. Clearing a fan obstruction costs nothing beyond your time. A replacement lower fan motor typically ranges from $40 to $120 for the part alone. If a control board replacement is required, parts and labor combined can range from $150 to $400 or more, depending on the model and service rates in your area.

Some causes of Er 06 are DIY-friendly, such as clearing debris from the fan blades or reseating a loose wiring connector. If the fan motor or control board has failed, replacing those components requires disassembling the dishwasher interior and working with electrical components, which is better suited to experienced DIYers or a professional technician.

A power reset by unplugging the unit or turning off the circuit breaker for a few minutes may temporarily clear the error code. However, if the underlying cause, such as a failed motor, obstruction, or damaged wiring, has not been addressed, the error will return during the next drying cycle. A reset alone is not a fix.