Electrolux EWDW6505GS1C

Available documentation

Error codes (16)

Service modes (28)

• Acceptance Test - B, C ControlPress 'Favorite' and 'Auto Wash' together. Then press
• Acceptance Test - B/C ControlPress 'Favorite' and 'Auto Wash' together
• Acceptance Tests - A ControlPress '<' and '>' simultaneously
• C-Relay Test - A ControlPress 'Delay Time' and 'Set' keys
• Child LockPress and release the DELAY TIME icon for 3 seconds
• Continuous Wash Mode - A ControlSimultaneously hold 'Delay Time' and 'Set' keys during power-up to enter diagnostics
• Demo Mode - A Control1
• Disable Display - A ControlPress and hold the left arrow for 10 seconds
• Disable Display (Sabbath Mode)Press and hold the left arrow key for 10 seconds.
• Discrete Relay/Triac and Sensor Test - A ControlPress 'Delay Time' and 'Set' keys simultaneously
• Discrete Relay/Triac and Sensor Test - B, C ControlPower on or power on reset, within 15 seconds hold simultaneously 'Sanitize' and 'Delay'. When 'Et'…
• Discrete Relay/Triac and Sensor Test - B/C ControlPower on or reset the machine and within 15 seconds hold simultaneously 'Sanitize' and 'Delay'
• Display Water Temperature and Turbidity Voltages Test Mode - A ControlSimultaneously hold 'Delay Time' and 'Set' keys during power-up
• Display Water Temperature and Turbidity Voltages Test Mode - B ControlPress 'Sanitize' and 'Delay Start' simultaneously
• Engineering Tests - A ControlPress 'Set' and 'Delay Start' keys simultaneously
• Engineering Tests - B, C and Panel Ready ControlPress 'Sanitize' and 'Delay Start' simultaneously. 'Et' is displayed. Then press specific cycle…
• Initial Setup / First UsePress and hold the SET icon for 5 seconds before first use.
• Initial Setup / Normal Operating Mode ResetPress and hold the SET icon for 5 seconds
• Lock ControlsPress and hold the AIR DRY button for 3 seconds when the door is latched.
• Locking the ControlPress and hold the AIR DRY button for 3 seconds when the door is latched.
• Reset to Normal Operating ModeHold down SET icon for 5 seconds to reset unit to Normal Operating Mode.
• Software Version - A ControlSimultaneously hold 'Delay Time' and 'Set' keys, then select the software ID test option.
• Software Version - B, C ControlSimultaneously hold 'Delay' and 'Sanitize' keys
• Software Version - B/C ControlSimultaneously hold 'Delay' and 'Sanitize' keys
• Storage / Sabbath Mode (Disable the Display)Press and hold the Left Arrow key and the Wash Cycles key simultaneously for 10 seconds
• Water Service Test - A Control (From Idle Mode)Simultaneously press the 'Wash Cycles' and 'Delay Time' keys for three seconds
• Water/Service Test - B, C Control (From Idle Mode)Simultaneously press 'Heavy' key (B & C models) and START/CANCEL keys for three seconds
• Water/Service Test - B/C Control (From Idle Mode)Simultaneously press the 'Heavy' key (B & C models) and the START/CANCEL keys for three seconds

Full entry steps, exit procedures, and test sequences are available in Max.