Model reference
GE JKP56
Oven
4 documents14 error codes7 service modes
Available documentation
Service Manual
- Electric Convection Built-In Oven Owner's Manual36 pg
Tech Sheet
- Appliance Diagnostic Modes Range GE Consumer & Industrial Technical Training255 pg
Training
- 27-In. Built-In Electric Wall Oven Technical Service Guide70 pg
- TECHNICAL SERVICE GUIDE 27-In. Built-In Electric Wall Oven70 pg
MyPros+ Max
Diagnose your GE JKP56.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (14)
CodeMeaning
F– and a number or letterFunction error code indicating a control or component malfunction.F0Stuck key or shorted keypad detected on the control panel.F2Oven over-temperature condition detected by the control.F3Oven temperature sensor open circuit (open sensor).F4Oven temperature sensor shorted circuit (shorted sensor).F5Sensor circuit supervisor failure in the control board.F7Stuck or shorted function key on the keypad.F8Control board failure (internal ERC fault).F9Door lock/latch motor failureFFLoss of latch motor safety circuit.HOTOven temperature is above 150°F, preventing proofing mode from operating.LOCControl lockout is active; touch pads are locked and cannot be activated.LOCK DOORSelf-clean cycle has been selected but the oven door is not closed.PROBEThe probe is inserted into the oven outlet but no probe temperature has been…Service modes (7)
- J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
- JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
- JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
- JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
- LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
- Special Features (SF) Mode["Press the BAKE and BROIL HI/LO pads at the same time and hold for 3 seconds (on double oven…
- Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass