Model reference
GE JKP78G0K3BG
Oven
4 documents16 error codes9 service modes
Available documentation
Service Manual
- GE Oven Mini Manual JKP78G0K3BG Control System Quick Test Instructions4 pg
- GE Oven JKP78GK Owners Manual59 pg
- GE Oven Service Manual JKP62GK JKP68GK JKP78GK RK962GK JHP62K JHP69K JHP70 K RH962K 31 025222 pg
- 27-in. Built-In Wall Ovens Technical Service Guide66 pg
MyPros+ Max
Diagnose your GE JKP78G0K3BG.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (16)
CodeMeaning
Auto Cook DelayOven will not accept Auto Cook Code because the oven cavity is still hot from…E EEInvalid clean time enteredEEEEError displayed when an invalid time entry is made (e.g., impossible clock time…ERRORHumidity sensor fault detected during Auto Cook diagnostic testF0Shorted OFF key detected on the key panel or control.F2Oven temperature inside oven cavity as measured by sensor exceeds 650°F…F3Open oven sensor (resistance over 2900 ohms).F4Shorted oven sensor (resistance under 950 ohms).F5Sensor circuit supervisor failure.F7Shorted matrix or START key.F8EEPROM data shift failure.F9Cooling fan stalls or other cause of open thermal switches in yellow or blue…PFPower Failure indicator appears on display when electrical power to the unit…PROBDisplayed when temperature probe is accidentally left plugged into the oven…PROBEProbe not inserted properly into oven receptacle or food, or Temp Cook/Hold or…RESETAppears in the upper display after power is first connected or after a power…Service modes (9)
- Auto Cook Diagnostic Test (all models except JKP78)["Open control panel and remove fuse.","Unplug CN5 connector (from Humidity sensor) on Smart…
- Auto Cook Diagnostic Test (JKP78)["Open control panel and remove fuse.","Unplug CN5 connector (from Humidity sensor).","Install fuse…
- Auto Cook Quick Test["Place 1/3 cup tap water in oven.","Touch AUTO COOK, 2, START.","After 1-2 minutes, control beeps…
- Control LockoutPress the Hour and Min
- Error Code Recall (JKP70, JKP75, PK916, PK956, ZEK938, ZEK958)Press the Timer, Clock, and 9 buttons simultaneously.
- Error Code Recall (JKS10, JKP30, JKP35, JKP55)Press the Timer, Clock, and Min Down buttons simultaneously.
- Oven Thermostat Adjustment1. Press Bake and Broil Hi/Lo pads at the same time for 3 seconds until display shows SF. 2. Press…
- Sales ModeConnect the unit to 120 VAC from L1-N only
- Special Features ModePress the Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass