GE ZEK958

Available documentation

Error codes (10)

Service modes (23)

• Control Lockout["Press the 9 and 0 pads at the same time for 3 seconds until the display shows 'LOC ON'."]
• ERC Failure Code RecallPress together
• Error Code Recall (JKP70, JKP75, PK916, PK956, ZEK938, ZEK958)Press the Timer, Clock, and 9 buttons simultaneously.
• Error Code Recall (JKS10, JKP30, JKP35, JKP55)Press the Timer, Clock, and Min Down buttons simultaneously.
• Glass Touch Parameter Setting (Control Not Replaced)1
• Glass Touch Parameter Setting (New Part Installation)1
• J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
• JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
• JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
• JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
• Key Panel Test["Press each pad on the key panel followed by the Clear/Off pad.","Verify audible tones and correct…
• LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
• Microwave Gas Sensor DiagnosticPress and hold the 7 and 8 number pads at the same time
• Oven Calibration1. Press and hold Bake & Broil pads until SF appears in display. 2. Press Bake pad to enter oven…
• Oven Calibration ModePress and hold Bake & Broil pads until SF appears in display. Press Bake pad to enter oven…
• Oven Thermostat Adjustment["Press the BAKE and BROIL HIGH/LOW pads at the same time for 3 seconds until the display shows…
• Recall Stored F-codesPress TIMER, CLOCK, and MIN DOWN (or 9) simultaneously.
• Sales ModeConnect the oven control to 120 VAC from L1-N only (no 240 VAC).
• Special Features (SF) Mode["Press the BAKE and BROIL HIGH/LOW pads at the same time for 3 seconds until the display shows…
• Special Features ModePress the Bake and Broil Hi/Lo pads (on double oven models, use the upper oven controls) at the…
• Special Features Mode (SF)["Press Bake and Broil Hi/Lo pads at the same time for 3 seconds until the display shows SF.","On…
• Special Functions (SF) ModePress and hold BAKE and BROIL pads for 2 seconds
• Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…

Full entry steps, exit procedures, and test sequences are available in Max.