mypros+
Model reference

Jenn-Air JMW9530DA

Oven

11 documents40 error codes20 service modes

Available documentation

Service Manual

  • Service Manual - Combination Electric Wall Ovens and Microwaves45 pg
    Covers this model
  • JennAir Wall Oven MW JMW8527DA JMW8530DA JMW9527DA JMW9530DA MMW5530DA Service Manual 1602282145 pg
    Covers this model

Tech Sheet

  • Electric Wall Oven/Microwave⎯Technical Information11 pg
    Covers this model
  • Electric Wall Oven/Microwave—Technical Information11 pg
    Covers this model

Bulletin

  • Technical Bulletin - Cooling Fan Noise1 pg
    Covers this model
  • Installation Bulletin1 pg
    Covers this model
  • Technical Bulletin - Side Trim Change1 pg
    Covers this model
  • Installation Bulletin - IDC-0004-B Updated Dimensions in Installation Instructions 8101P602-601 pg
    Covers this model
  • Technical Bulletin TDC-0100A-B1 pg
    Covers this model
  • Technical Bulletin - Hinge and Receptacle Modification2 pg
    Covers this model

Service Flash

  • Repair Tip - Hinge and Receptacle Modification2 pg
    Covers this model
MyPros+ Max

Diagnose your Jenn-Air JMW9530DA.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (40)

CodeMeaning
1c1cShorted key detected on control keypad.1c2cKeyboard tail disconnected (single cavity or upper oven).1c31Cancel key circuit failure (single cavity or upper oven).1c32Cancel key circuit failure (lower oven).1c4cMicro communication failure.1c5cVcc or ground open circuit on control board.1c6cEEPROM error on control board.1c7cControl not calibrated.1c81Cook profile corrupted in EEPROM (UH1/2 control, upper oven).1c82Cook profile corrupted in EEPROM (UH1/2 control, lower oven).1c8cCooking profile corrupted in EEPROM.1d11Runaway temperature with door unlocked (single cavity or upper oven).1d12Runaway temperature with door unlocked (lower oven).1d21Runaway temperature with door locked (single cavity or upper oven).1d22Runaway temperature with door locked (lower oven).3d11Temperature sensor open (single cavity or upper oven).3d12Temperature sensor open (lower oven).3d21Temperature sensor shorted (single cavity or upper oven).3d22Temperature sensor shorted (lower oven).3d31Meat probe open (single cavity or upper oven).3d41Meat probe open (single cavity or upper oven, alternate code).3d51Meat probe not calibrated4d11Door switch input clean/open (single cavity or upper oven) during self-clean.4d12Door switch input clean/open (lower oven) during self-clean.4d21No cooling fan rotation / no RPM detected (single cavity or upper oven).4d22No cooling fan rotation / no RPM detected (lower oven).4d31Fan state error4d32Fan state error4d41Low cooling fan rotation when fan is supposed to be on (single cavity or upper…4d42Low cooling fan rotation when fan is supposed to be on (lower oven).
View all 40 error codes
4d51Door switch circuit failure4d52Door switch circuit failure9d11Door latch will not lock (single cavity or upper oven).9d12Door latch will not lock (lower oven).9d21Door latch will not unlock (single cavity or upper oven).9d22Door latch will not unlock (lower oven).9d31Door latch shows both locked and unlocked simultaneously (single cavity or…9d32Door latch shows both locked and unlocked simultaneously (lower oven).9d41Door latch shows neither locked nor unlocked (single cavity or upper oven).9d42Door latch shows neither locked nor unlocked (lower oven).

Service modes (20)

  • 208/240 V Mode["1
  • 24 Hour Clock Toggle (H1 Control)Press and hold CANCEL and FAVORITE pads for 3 seconds.
  • Child Lock Out (H1 Control)Press and hold CANCEL and COOK & HOLD pads for 3 seconds
  • Clock Display Toggle (H1 Control)Press and hold CANCEL and CLOCK pads for 3 seconds.
  • Control LockoutPress and hold BACK and ENTER pads for 5 seconds.
  • Control Lockout (UH1/2 Control)Press and hold BACK and ENTER pads for 5 seconds.
  • Demo Mode1
  • Diagnostic Code Display ModeEnter Service Mode then press 'Last Fault' to display last error code and oven configuration…
  • Diagnostic Code Display Mode (H1 Control)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Factory Default Reset (H1 Control)Press and hold CANCEL and KEEP WARM pads for 3 seconds.
  • Oven Temperature Adjustment["1
  • Oven Temperature Adjustment (H1 Control)1
  • Quick Test Mode (H1 Control)1
  • Sabbath Mode["1
  • Sabbath Mode (H1 Control)Hold CLOCK pad for 3 seconds to activate Sabbath mode.
  • Sabbath Mode (UH1/2 Control)1
  • Service / Test Mode["1
  • Service/Test Mode1
  • Temperature Display Toggle (H1 Control)Press and hold CANCEL and BAKE pads for 3 seconds.
  • Test Mode (UH1/2 Control)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Jenn-Air oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass