Model reference
Jenn-Air JGS8750ADW
Range
7 documents39 error codes13 service modes
Available documentation
Service Manual
- Gas Slide-In Range Service Manual44 pg
- Gas Slide-In Range Service Manual44 pg
- JENN AIR Gas Slide In Range Service Manual JGS8750ADB S W JGS8850ADB Q S W44 pg
- Service Manual - 1602208944 pg
Tech Sheet
- Technical Information⎯Gas Slide-In Range JGS8750ADB/S/W JGS8850ADB/Q/S/W10 pg
- Technical Information—Gas Slide-In Range13 pg
Bulletin
- Conversion to LP1 pg
MyPros+ Max
Diagnose your Jenn-Air JGS8750ADW.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (39)
CodeMeaning
1c1cShorted key detected on the membrane keyboard.1c2cMembrane keyboard disconnected.1c4cBoard-to-board communication failure.1c6cEEPROM hardware fault.1c7cControl not calibrated.1c81EEPROM CRC error1c8cEEPROM CRC error1d11Unlocked runaway temperature1d21Locked runaway temperature3d11Temperature sensor open.3d21Temperature sensor shorted.3d41Meat probe shorted.3d51Meat probe not calibrated.4d11Door switch not closed when locked.4d21No cooling fan rotation.4d31Cooling fan on when de-energized.4d41Cooling fan overspeed.4d51Door switch circuit fault.9d11Latch will not lock.9d21Latch will not unlock.9d31Latch both locked and unlocked simultaneously.F0-0No fault detected.F1-1Oven temperature above 650°F (343°C) in bake mode.F1-3Oven temperature above 950°F (510°C) during a clean cycle.F1-5Cancel pad not responding.F1-7Membrane disconnected.F1-8Shorted key (pad) in membrane switch.F1-9Internal control communication errors.F1-ALock/unlock switch state not advancing to control.F1-COven door switch state not advancing to control.View all 39 error codes
F1-EControl not calibrated.F1-FJumper not removed from printed circuit board (PCB).F1-HEEPROM error.F1-NInternal voltage for slave micro incorrect.F3-1Open or shorted oven sensor.F8Shorted meat probe.F9-1Oven door will not lock.F9-2Oven door will not unlock.F9-3Oven door status is both locked and unlocked.
Service modes (13)
- Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
- Control ResetPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Demo ModePress the Setup pad, then press the right ATM pad until DEMO displays
- Display TestPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Faults AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Quick Test Mode1
- Quick Test Mode (EOC II)["Press and hold the Cancel and Broil pads simultaneously for 3 seconds at power-up, or within 5…
- Quick Test Mode (EOC III)1
- Service ModePress the Setup pad, then press the right ATM pad until SERVICE displays
- Setup Options (Factory Default Change)1
- Software Versions AccessPress and hold the Back and Enter pads for 5 seconds to enter SERVICE menu options
- Test AccessPress the Setup pad, then press the right ATM pad until SERVICE displays
- View Most Recent Fault Code1
Full entry steps, exit procedures, and test sequences are available in Max.
Related Jenn-Air range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass