mypros+
Model reference

Maytag MER6755AAW

Range

12 documents66 error codes66 service modes

Available documentation

Tech Sheet

  • Technical Information⎯Double Oven Electric Range14 pg
    Covers this model
  • Technical Information⎯Double Oven Electric Range6 pg
    Covers this model
  • Technical Information⎯Double Oven Electric Range17 pg
    Covers this model

Service Manual

  • Oven Range Service Manual85 pg
    Covers this model
  • Freestanding Double Oven Electric Range85 pg
    Covers this model
  • Service Manual85 pg
    Covers this model
  • Service Manual - Freestanding Double Oven Electric Range85 pg
    Covers this model
  • Maytag Freestanding Double Oven Electric Range Service Manual85 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model

Service Flash

  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
    Covers this model

Other

  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MER6755AAW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (66)

CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem (upper oven / single cavity).1c32Cancel key circuit problem (lower oven).1c4cMicro communication failure.1c5cVCC or ground fault on control circuit board.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) detected with door unlocked (upper/single cavity).1d12Runaway temperature (650°F) detected with door unlocked (lower cavity).1d21Runaway temperature (950°F) detected with door locked (upper/single cavity).1d22Runaway temperature (950°F) detected with door locked (lower cavity).3d11Temperature sensor open (single cavity or upper cavity); sensor resistance…3d12Temperature sensor open (lower cavity); sensor resistance reads infinite.3d21Temperature sensor shorted (upper/single cavity); sensor resistance reads 0…3d22Temperature sensor shorted (lower cavity); sensor resistance reads 0 ohms.3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch not closed when door is locked (upper oven).4d12Door switch not closed when door is locked (lower oven).4d21No reverse airflow fan rotation detected (no or low RPM).4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan is on when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch not open or closed
View all 66 error codes
4d52Door switch not open or closed9d11Door latch will not lock (upper/single cavity); lock switch not closed when it…9d12Door latch will not lock (lower cavity); lock switch not closed.9d21Door latch will not unlock (upper/single cavity); unlock switch not closed when…9d22Door latch will not unlock (lower cavity); unlock switch not closed.9d31Latch state unknown9d32Latch state unknown9d41Latch state unknown9d42Latch state unknownEEControl cannot read EEPROM; unit will shut down.F0-0No fault (default from factory).F1-1Upper oven temperature >650°F with door unlocked.F1-2Lower oven temperature >650°F with door unlocked.F1-3Upper oven temperature >950°F with door locked.F1-4Lower oven temperature >950°F with door locked.F1-5Upper hardware failure within control.F1-6Lower hardware failure within control.F1-7Membrane switch is not responding.F1-8Shorted key in membrane switch.F1-9Internal communication errors within control.F1-AUpper latch switches failure.F1-BLower latch switches failure.F1-CUpper door switch failure.F1-DLower door switch failure.F1-ESensor input not calibrated.F1-HEEPROM error.F1-LTemperatures in ovens are the same for a long period.F1-NInternal voltage on control not working.F3-1Upper sensor is shorted (<100 ohms) or open (>5K ohms).F3-2Lower sensor is shorted (<100 ohms) or open (>5K ohms).F9-1Upper lock switch is not correct.F9-2Upper unlock switch is not correct.F9-3Control does not see upper door lock.F9-4Lower lock switch is not correct.F9-5Lower unlock switch is not correct.F9-6Control does not see lower door lock.

Service modes (66)

  • 24 Hour Clock Toggle["Press and hold UPPER CANCEL and DELAY pads for 3 seconds."]
  • 24 Hour Clock Toggle (MER6875AC*)Press and hold Upper Cancel and Favorite pads for 3 seconds.
  • Beeper Volume Adjustment["Hold UPPER CANCEL and MORE (+) pads for 3 seconds to adjust beeper loudness level."]
  • Beeper Volume Adjustment (MER6555AC*, MER6755AC*, MER6775AC*)Hold Upper Cancel and More+ pads for 3 seconds.
  • Beeper Volume Adjustment (MER6875AC*)Hold Upper Cancel and Delay pads for 3 seconds.
  • Child Lock Out["Press and hold UPPER CANCEL and COOK & HOLD pads for 3 seconds.","OFF will display where the…
  • Child Lock Out (H2 Control)Press and hold Upper Cancel and Cook & Hold pads for 3 seconds
  • Child Lock Out (H3 Control)Press and hold Upper Cancel and Cook & Hold pads for 3 seconds
  • Child LockoutPress and hold Upper Cancel and Cook & Hold pads for 3 seconds
  • Clock Display Toggle["Press and hold UPPER CANCEL and CLOCK pads for 3 seconds."]
  • Clock Display Toggle (MER6875AC*)Press and hold Upper Cancel and Clock pads for 3 seconds.
  • Clock Display Toggle (On/Off)Press and hold Upper Cancel and Clock pads for 3 seconds.
  • Demo Mode["Press and hold UPPER CANCEL and LESS (-) pads for 3 seconds."]
  • Demo Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Less- pads for 3 seconds.
  • Diagnostic Code Display["Press and hold UPPER CANCEL and TIMER pads for 3 seconds within 5 minutes of power-up.","Cycle…
  • Diagnostic Code Display ModeEnter Quick Test Mode (press and hold UPPER CANCEL and UPPER BROIL pads for 3 seconds within 5…
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H2 Control - MER6875A**)["Must be within 5 minutes of power-up.","Press and hold UPPER CANCEL and UPPER BROIL pads for 3…
  • Diagnostic Code Display Mode (H2 Control)Enter Quick Test Mode (press and hold UPPER CANCEL and UPPER BROIL for 3 seconds within 5 minutes…
  • Diagnostic Code Display Mode (H3 Control - MER6555A**, MER6751AA*, MER6755A**, MER6775A**)["Must be within 5 minutes of power-up.","Press and hold UPPER CANCEL and TIMER pads for 3…
  • Diagnostic Code Display Mode (H3 Control)Enter Quick Test Mode (press and hold UPPER CANCEL and TIMER for 3 seconds within 5 minutes of…
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold UPPER CANCEL and TIMER pads for 3 seconds within 5 minutes of power up
  • Diagnostic Code Display Mode (MER6875AC*)Press and hold UPPER CANCEL and AUTOSET pads for 3 seconds
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Engineering Test Mode["Press BAKE pad.","Enter 100°F using the number pads.","Immediately push and hold BAKE pad for…
  • Factory Default (Clock Reset)Press and hold Upper Cancel and Warm pads for 3 seconds.
  • Factory Default Reset["Press and hold UPPER CANCEL and WARM pads for 3 seconds."]
  • Factory Default Reset (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Warm pads for 3 seconds.
  • Factory Default Reset (MER6875AC*)Press and hold Upper Cancel and Upper Keep Warm pads for 3 seconds.
  • Faults Access (EOC III Controls)1
  • Lower Oven Temperature Adjustment["Press LOWER BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold LOWER BAKE pad…
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment - Lower Oven (MER6555AC*, MER6755AC*, MER6775AC*)1
  • Oven Temperature Adjustment - Lower Oven (MER6875AC*)1
  • Oven Temperature Adjustment - Upper Oven (MER6555AC*, MER6755AC*, MER6775AC*)1
  • Oven Temperature Adjustment - Upper Oven (MER6875AC*)1
  • Quick Test Mode["Within 5 minutes of power-up, press and hold UPPER CANCEL and UPPER BROIL pads simultaneously for…
  • Quick Test Mode - Component ActivationPress and hold UPPER CANCEL and BROIL pads for 3 seconds
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2 Control - MER6875A**)Within 5 minutes of power-up, press and hold UPPER CANCEL and UPPER BROIL pads for 3 seconds
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Control - MER6555A**, MER6751AA*, MER6755A**, MER6775A**)Within 5 minutes of power-up, press and hold UPPER CANCEL and TIMER pads for 3 seconds.
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold UPPER CANCEL and TIMER pads for 3 seconds within 5 minutes of power-up.
  • Quick Test Mode (MER6875AC*)Press and hold UPPER CANCEL and UPPER BROIL pads for 3 seconds within 5 minutes of power-up
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Quick Test Setup Options["Enter Quick Test Mode first.","Press the 0 pad.","'Press Desired Pad for Selection' will scroll…
  • Sabbath Mode["Oven must be in BAKE mode before enabling.","Hold CLOCK pad for 5 seconds to activate Sabbath…
  • Sabbath Mode (H2 Control)Hold Clock pad for 3 to 5 seconds to activate Sabbath mode.
  • Sabbath Mode (H3 Control)Hold Clock pad for 5 seconds to activate Sabbath mode
  • Sabbath Mode (MER6555AC*, MER6755AC*, MER6775AC*)Hold Clock pad for 5 seconds to activate Sabbath mode
  • Sabbath Mode (MER6875AC*)Hold Clock pad for 3 to 5 seconds to activate Sabbath mode.
  • Service Mode (EOC III Controls)1
  • Setup Options ModeWhile in Quick Test Mode, press the 0 pad
  • Temperature Display (°F/°C toggle)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Temperature Display (F/C toggle)["Press and hold UPPER CANCEL and UPPER BAKE pads for 3 seconds."]
  • Temperature Display Toggle (MER6555AC*, MER6755AC*, MER6775AC*)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Temperature Display Toggle (MER6875AC*)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Test Mode["Must be activated within first 5 minutes of power up.","Press BROIL and CANCEL pads for…
  • Test Mode (ERC)Must be activated within the first 5 minutes of power up
  • Test Mode (UH Controls)1
  • Upper Oven Temperature Adjustment["Press UPPER BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold UPPER BAKE pad…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass