mypros+
Model reference

Maytag MGR6875ADB

Range

13 documents54 error codes33 service modes

Available documentation

Tech Sheet

  • Double Oven Gas Range—Technical Information10 pg
    Covers this model
  • Technical Information—Double Oven Gas Range MGR6875ADB/Q/S/W10 pg
    Covers this model
  • Technical Information - Double Oven Gas Range10 pg
    Covers this model
  • Technical Information⎯Double Oven Gas Range6 pg
    Covers this model

Service Manual

  • Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model
  • Service Manual - Freestanding Double Oven Gas Range69 pg
    Covers this model
  • Maytag Gemini Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model

Bulletin

  • Installation Bulletin - IDC-0008-B LP Gas Conversion1 pg
    Covers this model
  • Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
    Covers this model
  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking2 pg
    Covers this model

Installation Guide

  • Installation Bulletin - IDC-0005-B Location of Electrical and Gas Supply Connections for new Freestanding Double Oven Gas Range1 pg
    Covers this model
  • Instruction Sheet4 pg
    Covers this model

Other

  • 16023415_1602341569 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR6875ADB.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (54)

CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected; keyboard loop reads improper value.1c31Cancel key circuit problem (upper oven); cancel key reads improper value.1c32Cancel key circuit problem (lower oven); cancel key reads improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) with door unlocked in upper oven; sensor resistance…1d12Runaway temperature (650°F) with door unlocked in lower oven; sensor resistance…1d21Runaway temperature (950°F) with door locked in upper oven; sensor resistance >…1d22Runaway temperature (950°F) with door locked in lower oven; sensor resistance >…3d11Temperature sensor open in upper oven; sensor resistance reads infinite ohms.3d12Temperature sensor open in lower oven; sensor resistance reads infinite ohms.3d21Temperature sensor shorted in upper oven; sensor resistance reads 0 ohms.3d22Temperature sensor shorted in lower oven; sensor resistance reads 0 ohms.4d11Door switch position failure in upper oven; door switch not closed when door is…4d12Door switch position failure in lower oven; door switch not closed when door is…4d21No reverse airflow fan rotation (no or low RPM) in upper oven.4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure in upper oven; door switch not reading open or…4d52Door switch circuit failure in lower oven; door switch not reading open or…9d11Latch will not lock in upper oven; lock switch not closed.9d12Latch will not lock in lower oven; lock switch not closed.9d21Latch will not unlock in upper oven; unlock switch not closed.9d22Latch will not unlock in lower oven; unlock switch not closed.9d31Latch state unknown in upper oven; both locked and unlocked switches indicate…9d32Latch state unknown in lower oven; both locked and unlocked switches indicate…EEControl cannot read E-PROM; unit will shut down.F0-0No faultF1-1Upper oven temperature exceeds 650°F with door unlocked.
View all 54 error codes
F1-2Lower oven temperature exceeds 650°F with door unlocked.F1-3Upper oven temperature exceeds 950°F with door locked.F1-4Lower oven temperature exceeds 950°F with door locked.F1-5Upper hardware failure within control.F1-6Lower hardware failure within control.F1-7Membrane switch is not responding.F1-8Shorted key in membrane switch.F1-9Internal communication errors within control.F1-AUpper latch switches failure.F1-BLower latch switches failure.F1-CUpper door switch failure.F1-DLower door switch failure.F1-ESensor input not calibrated.F1-HEEPROM error.F1-LTemperature in ovens are the same for a long period.F1-NInternal voltage on control not working.F3-1Upper sensor is shorted (<100 ohms) or open (>5K ohms).F3-2Lower sensor is shorted (<100 ohms) or open (>5K ohms).F9-1Upper lock switch is not correct.F9-2Upper unlock switch is not correct.F9-3Control does not see upper door lock.F9-4Lower lock switch is not correct.F9-5Lower unlock switch is not correct.F9-6Control does not see lower door lock.

Service modes (33)

  • 24 Hour Clock TogglePress and hold UPPER CANCEL and FAVORITE pads for 3 seconds.
  • 24-Hour Clock TogglePress and hold Upper Cancel and Favorite pads for 3 to 5 seconds.
  • Beeper Volume AdjustmentPress and hold Upper Cancel and Delay pads for 3 to 5 seconds.
  • Child Lock OutPress and hold UPPER CANCEL and COOK & HOLD pads for 3 seconds
  • Child LockoutPress and hold Upper Cancel and Cook & Hold pads for 3 to 5 seconds
  • Clock Display TogglePress and hold Upper Cancel and Clock pads for 3 to 5 seconds.
  • Clock Display Toggle (On/Off)Press and hold Upper Cancel and Clock pads for 3 to 5 seconds.
  • Diagnostic Code Display (from Quick Test)Press and hold UPPER CANCEL and AUTOSET pads for 3 to 5 seconds
  • Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 to 5 seconds at power-up
  • Diagnostic Code Display Mode (at power-up)Press and hold the AUTOSET pad for 3 seconds at power-up (when applying power to the control).
  • Diagnostic Code Display Mode (H2 Control - MGR6875AD*)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer for 3 seconds within 5 minutes of power up.
  • Engineering Test ModePress BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Engineering Test Mode (H3 Control - MGR6775AD*)Press BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Factory Default ResetPress and hold Upper Cancel and Upper Keep Warm pads for 3 to 5 seconds.
  • Lower Oven Temperature Adjustment1
  • Oven Temperature Adjustment (Lower Oven)1
  • Oven Temperature Adjustment (Upper Oven)1
  • Quick Test ModePress and hold the UPPER CANCEL and BROIL pads simultaneously for 3 to 5 seconds
  • Quick Test Mode (ERC)1
  • Quick Test Mode (H2 Control - MGR6875AD*)Press and hold Upper Cancel and Autoset pads for 3 seconds.
  • Quick Test Mode (H2 Control)1
  • Quick Test Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer pads for 3 seconds within 5 minutes of power up.
  • Sabbath ModeHold Clock pad for 3 to 5 seconds to activate Sabbath mode.
  • Setup Options (Quick Test sub-mode)During Quick Test mode, press the 0 pad
  • Setup Options (within Quick Test Mode)While in Quick Test Mode, press the 0 pad
  • Temperature Display (F/C toggle)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Temperature Display Toggle (°F/°C)Press and hold Upper Cancel and Upper Bake pads for 3 to 5 seconds.
  • Temperature Display Toggle (F/C)Press and hold Upper Cancel and Upper Bake pads for 3 to 5 seconds.
  • Test Mode1
  • Test Mode (H3 Control - MGR6775AD*)1
  • Twelve Hour OffControl will automatically cancel any cooking operation and remove all relay drives 12 hours after…
  • Upper Oven Temperature Adjustment1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass