mypros+
Model reference

Maytag MGR6875ADW

Range

19 documents63 error codes45 service modes

Available documentation

Tech Sheet

  • Double Oven Gas Range—Technical Information10 pg
    Covers this model
  • Technical Information—Double Oven Gas Range MGR6875ADB/Q/S/W10 pg
    Covers this model
  • Technical Information - Double Oven Gas Range10 pg
    Covers this model
  • Technical Information⎯Double Oven Gas Range6 pg
    Covers this model

Service Manual

  • Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model
  • Service Manual - Freestanding Double Oven Gas Range69 pg
    Covers this model
  • Maytag Gemini Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model

Bulletin

  • Installation Bulletin - IDC-0005-B Location of Electrical and Gas Supply Connections for new Freestanding Double Oven Gas Range1 pg
    Covers this model
  • Installation Bulletin - IDC-0008-B LP Gas Conversion1 pg
    Covers this model
  • Installation Bulletin - IDC-0008-B LP Gas Conversion1 pg
    Covers this model
  • Technical Bulletin - TDC-0097-B Ignitor Switch Failures1 pg
    Covers this model
  • Technical Bulletin - TDC-0097-B-French Ignitor Switch Failures1 pg
    Covers this model

Installation Guide

  • Installation Instructions14 pg
    Covers this model
  • Instruction Sheet2 pg
    Covers this model
  • Installation Bulletin - IDC-0005-B Location of Electrical and Gas Supply Connections for new Freestanding Double Oven Gas Range1 pg
    Covers this model
  • Instruction Sheet4 pg
    Covers this model

Other

  • 16023415_1602341569 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR6875ADW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (63)

CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected; keyboard loop reads improper value.1c31Cancel key circuit problem (upper oven); cancel key reads improper value.1c32Cancel key circuit problem (lower oven); cancel key reads improper value.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) with door unlocked in upper oven; sensor resistance…1d12Runaway temperature (650°F) with door unlocked in lower oven; sensor resistance…1d21Runaway temperature (950°F) with door locked in upper oven; sensor resistance >…1d22Runaway temperature (950°F) with door locked in lower oven; sensor resistance >…3d11Temperature sensor open in upper oven; sensor resistance reads infinite ohms.3d12Temperature sensor open in lower oven; sensor resistance reads infinite ohms.3d21Temperature sensor shorted in upper oven; sensor resistance reads 0 ohms.3d22Temperature sensor shorted in lower oven; sensor resistance reads 0 ohms.3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure in upper oven; door switch not closed when door is…4d12Door switch position failure in lower oven; door switch not closed when door is…4d21No reverse airflow fan rotation (no or low RPM) in upper oven.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan is on when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure in upper oven; door switch not reading open or…4d52Door switch circuit failure in lower oven; door switch not reading open or…
View all 63 error codes
9d11Latch will not lock in upper oven; lock switch not closed.9d12Latch will not lock in lower oven; lock switch not closed.9d21Latch will not unlock in upper oven; unlock switch not closed.9d22Latch will not unlock in lower oven; unlock switch not closed.9d31Latch state unknown in upper oven; both locked and unlocked switches indicate…9d32Latch state unknown in lower oven; both locked and unlocked switches indicate…EEControl cannot read E-PROM; unit will shut down.F0-0No faultF1-1Upper oven temperature exceeds 650°F with door unlocked.F1-2Lower oven temperature exceeds 650°F with door unlocked.F1-3Upper oven temperature exceeds 950°F with door locked.F1-4Lower oven temperature exceeds 950°F with door locked.F1-5Upper hardware failure within control.F1-6Lower hardware failure within control.F1-7Membrane switch is not responding.F1-8Shorted key in membrane switch.F1-9Internal communication errors within control.F1-AUpper latch switches failure.F1-BLower latch switches failure.F1-CUpper door switch failure.F1-DLower door switch failure.F1-ESensor input not calibrated.F1-HEEPROM error.F1-LTemperature in ovens are the same for a long period.F1-NInternal voltage on control not working.F3-1Upper sensor is shorted (<100 ohms) or open (>5K ohms).F3-2Lower sensor is shorted (<100 ohms) or open (>5K ohms).F9-1Upper lock switch is not correct.F9-2Upper unlock switch is not correct.F9-3Control does not see upper door lock.F9-4Lower lock switch is not correct.F9-5Lower unlock switch is not correct.F9-6Control does not see lower door lock.

Service modes (45)

  • 24 Hour Clock TogglePress and hold UPPER CANCEL and FAVORITE pads for 3 seconds.
  • 24-Hour Clock TogglePress and hold Upper Cancel and Favorite pads for 3 to 5 seconds.
  • Beeper Volume AdjustmentPress and hold Upper Cancel and Delay pads for 3 to 5 seconds.
  • Child Lock OutPress and hold UPPER CANCEL and COOK & HOLD pads for 3 seconds
  • Child LockoutPress and hold Upper Cancel and Cook & Hold pads for 3 to 5 seconds
  • Clock Display TogglePress and hold UPPER CANCEL and CLOCK pads for 3 seconds.
  • Clock Display Toggle (On/Off)Press and hold Upper Cancel and Clock pads for 3 to 5 seconds.
  • Diagnostic Code Display (from Quick Test)Press and hold UPPER CANCEL and AUTOSET pads for 3 to 5 seconds
  • Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 to 5 seconds at power-up
  • Diagnostic Code Display Mode (at power-up)Press and hold the AUTOSET pad for 3 seconds at power-up (when applying power to the control).
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H2 Control - MGR6875AD*)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer for 3 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Engineering Test ModePress BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Engineering Test Mode (H3 Control - MGR6775AD*)Press BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Factory Default ResetPress and hold Upper Cancel and Upper Keep Warm pads for 3 to 5 seconds.
  • Faults Access (EOC III Controls)1
  • Lower Oven Temperature Adjustment1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Quick Test ModePress and hold the UPPER CANCEL and BROIL pads simultaneously for 3 to 5 seconds
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (ERC)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2 Control - MGR6875AD*)Press and hold Upper Cancel and Autoset pads for 3 seconds.
  • Quick Test Mode (H2 Control)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer pads for 3 seconds within 5 minutes of power up.
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath ModeHold Clock pad for 3 to 5 seconds to activate Sabbath mode.
  • Service Mode (EOC III Controls)1
  • Setup Options (Quick Test sub-mode)During Quick Test mode, press the 0 pad
  • Setup Options (within Quick Test Mode)While in Quick Test Mode, press the 0 pad
  • Temperature Display (F/C toggle)Press and hold Upper Cancel and Upper Bake pads for 3 seconds.
  • Temperature Display Toggle (°F/°C)Press and hold Upper Cancel and Upper Bake pads for 3 to 5 seconds.
  • Temperature Display Toggle (F/C)Press and hold UPPER CANCEL and UPPER BAKE pads for 3 seconds.
  • Test Mode1
  • Test Mode (H3 Control - MGR6775AD*)1
  • Test Mode (UH Controls)1
  • Twelve Hour OffControl will automatically cancel any cooking operation and remove all relay drives 12 hours after…
  • Upper Oven Temperature Adjustment1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass