mypros+
Model reference

Maytag W11156990C

Washer

1 document26 error codes4 service modes

Available documentation

Tech Sheet

  • Tech Sheet W11156990C52 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag W11156990C.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (26)

CodeMeaning
F0E1Load detected in drum during Clean Washer cycle.F0E2Excessive suds detected in washer; washer is running a suds reduction routine.F0E4High temperature error during wash cycle.F0E5Off balance load detected.F1E1Main relay open or shorted.F1E2MCU over- or under-voltage error.F3E1Pressure sensor signal missing or out of range.F3E2Wash NTC (thermistor) open or shorted.F3E6Accelerometer error.F4E1Wash heater relay error or no feedback signal; ACU cannot detect temperature…F4E2Heating timeout.F5E2Door lock failure.F5E3Door unlock failure.F5E4Door not open error.F6E1No communication from the HMI detected by ACU.F6E2No communication from the ACU detected by the HMI.F6E3No communication from the MCU detected by the ACU.F7E2MC/MCU over temperature error or MC/MCU over current error/internal failure.F7E8MC/Motor over temperature error.F7E9Motor will not turn (Locked Rotor).F7EAMotor disconnected error (alternate display F7E10).F7ECMC/MCU Overload (alternate display F7E12).F8E1Water inlet valve failure.F8E3Overflow condition detected.F9E1Long drain time.FCE0Communication between the Human Machine Interface and Wi-Fi Module has not been…

Service modes (4)

  • Human-Machine Interface TestFrom Service Diagnostic mode
  • Quick Diagnostic TestFrom Service Diagnostic mode
  • Service Diagnostic Mode1. Washer must be in standby mode (plugged in with all indicators off). 2. Wait 30 seconds after…
  • Software Version DisplayFrom Service Diagnostic mode

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass