mypros+
Model reference

Whirlpool WOD51EC7AS03

Oven

8 documents33 error codes12 service modes

Available documentation

Tech Sheet

  • Tech Sheet56 pg
    Covers this model
  • Tech Sheet32 pg
    Covers this model

Service Flash

  • Technical Service Pointer9 pg
    Covers this model
  • Service Pointer - W11437808 - Rev B - Over Air Software Update6 pg
    Covers this model

Tech Tip

  • Instruction Sheet2 pg
    Covers this model
  • installerlabel-w10643344-reva.pdf2 pg
    Covers this model

Other

  • BUILT-IN ELECTRIC SINGLE AND DOUBLE OVEN Use & Care Guide40 pg
    Covers this model

Installation Guide

  • Installation Instructions28 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool WOD51EC7AS03.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (33)

CodeMeaning
F1 E0Internal error on MRC board.F1 E1Internal error on MRC board.F1 E7Internal error on MRC board.F1 E9Internal error on MRC board.F1E0EEPROM Communication ErrorF1E1Upper RTD UncalibratedF1E2Lower RTD UncalibratedF1E5Sensor Usage Out of RangeF1E7PCB Thermistor Open or ShortedF1E9WIDE Queue FullF2 E0Keypad disconnected from MRC board.F2 E1Stuck key detected on keypad.F2 E2Invalid keypad detected.F2 E3Cancel key error on keypad.F2E0Keypad DisconnectedF2E1Stuck KeypadF2E2Cancel or Off Keypad ErrorF3 E0Main oven sensor open or shorted (upper cavity on single or double oven).F3 E1Main oven sensor open or shorted (lower cavity on double oven).F3E0Main Sensor Open or Shorted (Upper)F3E1Main Sensor Open or Shorted (Lower)F4E1Microwave Oven Magnetron Thermistor Open or ShortedF4E4Microwave Oven Humidity Sensor Open or ShortedF5 E0Door and latch switches do not agree.F5 E1Latch not operating.F5E0Door and Latch Switches Do Not AgreeF5E1Latch Not OperatingF6 E1Over temperature during cooking.F6 E2Over temperature during cleaning.F6E0Lost Communication with Microwave
View all 33 error codes
F6E1Over Temp CookF6E2Over Temp CleanF9E0Miswired

Service modes (12)

  • Auto Test Mode1
  • Diagnostics ModePress CANCEL>CANCEL>START or OFF>OFF>ON within 5 seconds. Use TEMP/TIME '+' or '-' or 'More' or…
  • Fault Display Reset1
  • Faults ScreenEnter Diagnostics Mode, navigate with TEMP/TIME '+'/'-' or 'More'/'Less' or number 3/6 keypads…
  • Semi Automatic Test ModeEnter Diagnostics Mode, navigate with TEMP/TIME '+'/'-' or 'More'/'Less' or number 3/6 keypads…
  • Software Version1
  • Temperature CalibrationPress Settings or Options keypad until 'Temp Calib' is displayed
  • Temperature Calibration (Double Oven)1
  • Temperature Calibration (Single Oven)1
  • Test ModeEnter Diagnostics Mode, then navigate with TEMP/TIME '+'/'-' or 'More'/'Less' or number 3/6 keypads…
  • Test Mode (Relay Activation)1
  • Usage Codes1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass