mypros+
Model reference

Whirlpool GFG471LVS3

Range

3 documents29 error codes18 service modes

Available documentation

Tech Sheet

  • Whirlpool Range WFG710H0AS0 Tech Sheet8 pg
    Covers this model
  • Tech Sheet - W10348457 - Rev B (FR)8 pg
    Covers this model

Service Manual

  • Troubleshooting Gas and Electric Freestanding Range Electronic Controls70 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool GFG471LVS3.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (29)

CodeMeaning
F1 E0Internal board failure.F1 E5Internal board failure.F1 E7Internal board failure.F1 E9Internal board failure.F1-E0EEPROM communication error.F1-E5Sensor out of range.F1-E7PCB thermistor open or shorted.F2 E0Keypad disconnected.F2 E1Stuck key.F2 E2Cancel key error.F2-E0Keypad disconnected.F2-E1Stuck key.F2-E2Cancel key error.F3 E0Main oven sensor open or shorted.F3 E2Warming drawer (WD) sensor open or shorted.F3-E0Main oven temperature sensor open or shorted.F3-E2Warming drawer sensor open or shorted.F5 E0Door and switches do not agree (Clean mode).F5 E1Door latch not operating (Clean mode).F5-E0Door and switches do not agree (Clean mode).F5-E1Door latch not operating (Clean mode).F6 E0Lost wide (wired) communication.F6 E1Over temperature during cook mode.F6 E2Over temperature during clean mode.F6 E3Over temperature (warming drawer).F6-E1Over temperature during cook mode.F6-E2Over temperature during clean mode.F6-E3Over temperature in warming drawer.GOODNo error(s) found.

Service modes (18)

  • Auto TestEnter Diagnostics Mode (CANCEL > CANCEL > START), then press the 'up' arrow or '+' (plus) key to…
  • Diagnostic Mode (Service Mode)["Press CANCEL, then CANCEL, then START.","Display shows 'TEST ON' with cavity temperature and door…
  • Diagnostics ModeWith the oven not in cooking, broiling, or cleaning mode, press CANCEL/OFF, then CANCEL/OFF, then…
  • Diagnostics Mode (MRC Control)Press CANCEL > CANCEL > START
  • DISPLAYEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to DISPLAY (step 5).
  • DISPLAY Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'DISPLAY' (step 5)."]
  • ENG MODEEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to ENG MODE (step…
  • ENG MODE (Engineering Mode)["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'ENG MODE' (step 2).","Press START…
  • FAULTSEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to FAULTS (step 7).
  • FAULTS Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'FAULTS' (step 7)."]
  • Relay Test (TEST ON mode)["Enter diagnostic mode (CANCEL > CANCEL > START).","At 'TEST ON' display, press the corresponding…
  • Temperature Adjustment["Press and hold OVEN LIGHT for 5 seconds.","Use Temp/Time or Temp/Hour buttons (model dependent)…
  • Temperature Adjustment (All MRC Controls)1
  • TEST MODE (Relay Checks)Enter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to TEST MODE (step…
  • USAGEEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to USAGE (step 1).
  • USAGE Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'USAGE' (step 1)."]
  • VERSIONEnter Service Mode (CANCEL > CANCEL > START), press 'up' arrow or '+' to scroll to VERSION (step 4).
  • VERSION Mode["Enter diagnostic mode (CANCEL > CANCEL > START).","Scroll to 'VERSION' (step 4)."]

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass