Model reference

Whirlpool WFE381LVQ1

Range

6 documents17 error codes4 service modes

Available documentation

Tech Sheet

Tech Sheet - W10434982 - Rev A8 pg
Covers this model
Tech Sheet - W10384452 - Rev A8 pg
Covers this model

Service Flash

Technical Service Pointer - W10432003 (F9 E0 Error Code)6 pg
Covers this model
Technical Service Pointer - W10473748 (F9 E0 Error Code)6 pg
Covers this model

Tech Tip

Instruction Sheet4 pg
Covers this model

Installation Guide

Installation Instructions16 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool WFE381LVQ1.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Range

F1 on my Whirlpool WFE381LVQ1

M+

Internal board failure (F1E0, F1E1,

From Tech Sheet W13745267, p.39:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (17)

CodeMeaning

F1Internal board failure (F1E0, F1E1, F1E2 on LCC 180/190).F1E0Internal board failure.F1E1Internal board failure.F1E2Internal board failure.F2Shorted key / A/D error(s) (F2E0 on LCC 180/190).F2E0Shorted key.F3Oven sensor opened, oven sensor shorted, BAKE/BROIL range over temperature, or…F3E0Oven sensor opened.F3E1Oven sensor shorted.F3E2Bake/Broil range over temperature.F3E3Clean range over temperature.F5Door and switches do not agree during Clean mode (F5E0/F5E2 on LCC 180/190).F5E0Door and switches do not agree (clean mode).F5E1Door latch not operating during Clean mode (F5 on LCC 90/95).F5E2Door and switches do not agree (clean mode).F9Miswired house or miswired range (F9E0 on LCC 180/190).F9E0Miswired house or miswired range.

Service modes (4)

Diagnostics ModePress CANCEL > CANCEL > START within a 5-second period.
Diagnostics Test Mode (Relay Checks)While in Diagnostics Mode, press individual keypads
Temperature AdjustmentStep 1
Temperature Adjustment ModeStep 1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass