Model reference
Whirlpool W10082766B
Washer
1 document18 error codes5 service modes
Available documentation
Tech Sheet
- Technical Sheet W10082766 Rev B2 pg
MyPros+ Max
Diagnose your Whirlpool W10082766B.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (18)
CodeMeaning
1-1Control detected K2 pilot relay stuck closed.2-1Control detected stuck key(s) in keypad or keypad connection.3-1Open or faulty temperature sensor, faulty temperature sensor input on control…3-2Shorted connection or component in Temperature Sensing Circuit, shorted or…3-3OWI (Optical Water Indicator) failure.4-1Control cannot determine diverter position.4-4Diverter motor is stuck ON.4-5Control detected diverter disk in sump is missing.5-1Door was not latched within 3 seconds of pressing the Start/Resume key, or door…5-2Control programmed to not start if it suspects door switch is stuck closed…6-1Wash motor has no communication6-2Wash motor communication error between control and motor.7-1No heat7-2Heating element stuck ON.8-1Low water/air in pump8-2Cool water8-3Cold water9-1Slow drainService modes (5)
- Control Lock TogglePress and hold the Heated Dry key for 5 seconds to turn on or off the Control Lock feature.
- Sales Demo Mode TogglePress the following key sequence in less than 3 seconds
- Service Diagnostics WITH Error CodesWhile in standby, press the following keys in less than 6 seconds
- Service Diagnostics WITHOUT Error CodesWhile in standby, press the following keys in less than 6 seconds
- Stuck Key Test1
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool washer models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass