Bosch Dishwasher Error Code E:00

E:00 means no errors have been detected during the dishwasher's internal diagnostic test. It is a status result, not a fault code. The control board has checked its monitored systems and found everything within normal parameters. No repair or service action is needed.

Yes, it is safe to operate the dishwasher when E:00 is the only code present. The code indicates a clean diagnostic result with no detected faults. Continue using the appliance normally.

There is no repair cost associated with E:00 because the code indicates no faults are present. If a technician visited solely for this code, you may only be responsible for a diagnostic service call fee, which typically ranges from 75 to 150 dollars depending on your location and provider.

No action is required when E:00 is displayed. The code confirms that the machine's self-test found no faults. If your dishwasher is also showing a symptom such as poor cleaning or failure to drain, that issue may be mechanical or plumbing-related and would need separate investigation.

E:00 does not need to be cleared because it is not a fault. It will no longer display once you exit the diagnostic or service mode. Performing a standard reset by pressing and holding the start button is not necessary for this code.