mypros+
Model reference

Bosch SHE

Dishwasher

1 document27 error codes6 service modes

Available documentation

Service Manual

  • Ascenta Dishwasher Repair Instruction49 pg
    Covers this model
MyPros+ Max

Diagnose your Bosch SHE.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (27)

CodeMeaning
E:00No failures recorded.E:01Power module BLDC controller failed; functional safety error.E:02Power module working (primary) relay failed; safety (backup) relay running…E:03Working (primary) relay and safety (backup) relays both failed.E:05Impulses without activation (code not used).E:06Door latch sensor not detected; functional safety error.E:08No water detected in heat pump.E:09Heating element burn through / safety relay error; power module controlling…E:10Heater resistance too high.E:11NTC1 to NTC2 internal check failed; functional safety error (NTC or NTC wiring…E:12Heater NTC resistances not balanced; heater NTCs have different resistances.E:13Water temperature too high; boil protect level (75°C / 167°F) exceeded…E:14Flow meter error (code not used; no flow meter).E:15Water in base (code not used for bases are open); float switch activated and…E:16Volume flow without activation (code not used; no flow meter).E:17Water volume too high; safety float activated.E:18Water volume too low; heat pump motor load too low.E:20Heater system check failed; functional safety error (heat pump winding…E:21Heat pump unable to circulate and clear blockage.E:23Drain pump motor coil system check failed; functional safety error (drain pump…E:24Drain pump is running but unable to remove the water; drain system blockage.E:25Drain pump unable to rotate; attempts to clear failed, or sump drain pump cover…E:26Reference cam not detected (code not used; no water switch).E:28Aqua sensor failed to calibrate.E:30Overvoltage detected.E:31Overloaded heat pump.E:32Overloaded drain pump.

Service modes (6)

  • Basic settings (Extra Dry / Rinse Aid) - Digital display models (SHE3ARF)Turn dishwasher on, press and hold '>' button, then press and hold Start button
  • Basic settings (Extra Dry / Rinse Aid) - LED models (SHE3AR5)Turn dishwasher on, press and hold '>' button, then press and hold Start button
  • Customer service test programEnter Special programs (press and hold '>' and Delay buttons, then turn on)
  • Error code programEnter Special programs (press and hold '>' and Delay buttons, then turn on)
  • Sales demo (showroom) programEnter Special programs (press and hold '>' and Delay buttons, then turn on)
  • Special programs (entry to error codes, customer service test, sales demo, etc.)Press and hold '>' and Delay buttons, then turn dishwasher on

Full entry steps, exit procedures, and test sequences are available in Max.

Related Bosch dishwasher models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass