mypros+
Error code reference

Electrolux Dishwasher Error Code iF1

High water level

Electrolux codesElectrolux dishwasher codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the iF1 error code actually means

Your Electrolux dishwasher detected that the water inside got too high and stayed that way for too long, so it automatically started draining to prevent an overflow. This could be caused by something as simple as a clogged filter or drain, or by a part that is not working correctly. The machine is doing its job by protecting your kitchen from water damage, but the underlying issue needs to be found and resolved before running another full cycle.

Diagnostic procedure

The full iF1 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check for buildup of soils in sump
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock iF1 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of iF1

Ranked by how often they cause this code
  1. 1Sump or filter clogged with food debris
  2. 2Obstructed or kinked drain hose
  3. 3Faulty or clogged drain pump
  4. 4Defective water inlet valve
  5. 5Faulty water level pressure sensor

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about iF1

What does iF1 mean on a Electrolux dishwasher?
The iF1 code means the water level inside the dishwasher tub exceeded the safety threshold and stayed above it for more than 4 seconds. The machine responds by automatically activating a drain cycle to bring the level back down. This is a safety feature, but the cause of the high water level must be identified and corrected before normal operation can resume.
Will resetting my Electrolux dishwasher clear the iF1 error?
A reset may temporarily clear the iF1 code, but it will return if the underlying cause has not been addressed. Simply powering the unit off and back on does not fix a clogged sump, a restricted drain hose, or a failing component. Resolve the root cause first, then reset the machine to confirm the error does not reappear.
How much does it cost to repair the iF1 error on an Electrolux dishwasher?
If the cause is a clogged filter or sump, the repair costs nothing beyond your time. If a drain pump replacement is needed, parts and labor typically range from roughly 150 dollars to 300 dollars depending on your location and service provider. A faulty water inlet valve or pressure sensor is generally a lower-cost repair, with parts typically ranging from 20 dollars to 80 dollars before labor.
How do I fix the iF1 error on my Electrolux dishwasher?
Start by removing and thoroughly cleaning the filter assembly and inspecting the sump area for accumulated food debris or grease, as this is the most common cause. Next, check that the drain hose is not kinked or blocked. If the error persists after clearing any physical obstructions, the drain pump or water inlet valve may need to be inspected or replaced.
Is the iF1 error on my Electrolux dishwasher dangerous?
The iF1 code itself represents the dishwasher working as intended to prevent an overflow, so the safety system is functioning. However, running the appliance repeatedly without resolving the cause could lead to water damage to cabinetry, flooring, or the appliance itself. It is best to diagnose and fix the issue before running another full wash cycle.

Related Electrolux dishwasher error codes

All Electrolux dishwasher codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass