mypros+
Error code reference

Frigidaire Dishwasher Error Code E:25

Drain pump cover missing or loose, preventing pressure build-up; drain pump blocked.

Frigidaire codesFrigidaire dishwasher codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E:25 error code actually means

Your dishwasher is having trouble draining water because something is wrong with the drain pump area at the bottom of the machine. Either a cover over the drain pump is missing or not snapped in correctly, or something is stuck in the pump and blocking it from spinning. Checking and reseating that cover, and clearing any debris from the pump, will usually resolve this issue.

Diagnostic procedure

The full E:25 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Replace missing or reinstall loose drain pump cover. Remove sump drain pump cover and confirm drain pump impeller is turning freely.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E:25 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E:25

Ranked by how often they cause this code
  1. 1Drain pump cover loose or improperly seated
  2. 2Drain pump cover missing
  3. 3Blocked or jammed drain pump impeller
  4. 4Cracked or damaged drain pump cover
  5. 5Failed drain pump motor

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E:25

What does E:25 mean on a Frigidaire dishwasher?
E:25 means the dishwasher detected a failure to build pressure in the drain pump system. This is most commonly caused by a missing or improperly installed drain pump cover, or by a blockage in the drain pump impeller. The dishwasher cannot complete its drain cycle until the condition is resolved.
Is it safe to use my dishwasher when E:25 is displayed?
You should not continue running the dishwasher while E:25 is active. The drain pump is not functioning correctly, which means water may not evacuate properly from the tub. Running cycles in this condition can leave standing water in the machine and may put additional strain on the pump motor.
How much does it cost to repair an E:25 error on a Frigidaire dishwasher?
If the issue is only a loose or improperly seated pump cover, the repair costs nothing beyond your time. A replacement drain pump cover, if the original is missing or damaged, typically costs in the range of $10 to $30 for the part. If the drain pump motor itself has failed, parts and labor combined can range from $100 to $250 depending on your location and service provider.
How do I fix E:25 on my Frigidaire dishwasher?
Start by locating the drain pump cover in the bottom of the dishwasher sump area and confirm it is properly seated and fully secured. If the cover is in place, remove it and check whether the pump impeller spins freely by hand. Clear any debris blocking the impeller, reinstall the cover, and run a drain cycle to see if the error clears.
Will resetting my Frigidaire dishwasher clear the E:25 error?
A reset may temporarily clear the error code from the display, but it will return as soon as the dishwasher attempts to drain again if the underlying problem is not fixed. The drain pump cover must be properly installed and the impeller must be free of obstructions for the error to stay cleared.

Related Frigidaire dishwasher error codes

All Frigidaire dishwasher codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass