Frigidaire Dishwasher Error Code CL

CL is a status indicator that means the dishwasher door is not fully closed or latched. The control board will not allow a wash cycle to start or continue until it receives a signal from the door switch confirming the door is properly secured. The status window lights will also flash to show the selected cycle. Firmly closing the door until it clicks will clear the code and allow the cycle to proceed.

The dishwasher will not operate while CL is displayed, which is a built-in safety feature. The appliance prevents the wash cycle from running with an unlatched door to avoid water leaks and exposure to hot water or steam. There is no safety risk from the code itself, and the unit will resume normal operation once the door is properly latched.

If the issue is a worn door latch assembly, replacement parts typically range from $15 to $60 depending on the specific model. A door switch is generally in the $10 to $40 range for the part alone. Adding professional labor for diagnosis and replacement can bring the total repair cost to $100 to $200 or more, though many homeowners with basic mechanical skills can replace these parts themselves.

Start by pushing the door shut firmly until you hear a click. Check that no dish racks are sticking out and blocking the door from closing fully. If the code persists after confirming the door is latched, inspect the door latch assembly for damage and test the door switch for proper electrical function. A faulty latch or switch will need to be replaced to resolve the issue.

A manual reset will not clear the CL code because it is a real-time status signal tied directly to the door switch position. The code will disappear on its own as soon as the control board detects that the door is fully latched. If the door is properly closed but the code remains, the issue is likely a faulty door latch or switch rather than a control board error that a reset would address.