mypros+
Model reference

Fisher & Paykel 517800

Refrigerator

4 documents18 error codes10 service modes

Available documentation

Service Manual

  • 790 Active Smart Refrigerator Freezer Service Manual59 pg
    Covers this model
  • 790 Active Smart Refrigerator Freezer59 pg
    Covers this model
  • GE Refrigerator gfsf2hcycww 31 51781 Mini Manual2 pg
    Covers this model

Other

  • fisher and paykel 790 active smart refrigerator freezer59 pg
    Covers this model
MyPros+ Max

Diagnose your Fisher & Paykel 517800.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (18)

CodeMeaning
1On the last power up, the power/control module failed its self-test.10The resistance of the PC sensor is outside the normal range (< 660 Ohms).11The current measured for the ambient heater, PC fan and FC fan is lower than…12The current measured for the ambient heater, PC fan and FC fan is higher than…13Low ambient heater is drawing less current than expected14Low ambient heater is drawing more current than expected15The PC fan is drawing less current than expected16The PC fan is drawing more current than expected17The FC fan is drawing less current than expected18The FC fan is drawing more current than expected2The previous 2 defrosts were aborted after 30 minutes.3The resistance of all the temperature sensors is outside the normal range (>…4The resistance of all the temperature sensors is outside the normal range (<…5The resistance of the FC sensor is outside the normal range (> 45K Ohms).6The resistance of the FC sensor is outside the normal range (< 660 Ohms).7The resistance of the evaporator sensor is outside the normal range (> 45K…8The resistance of the evaporator sensor is outside the normal range (< 660…9The resistance of the PC sensor is outside the normal range (> 45K Ohms).

Service modes (10)

  • Data Download Mode1. Press and hold the MODE button (a short beep will sound). 2. Whilst still holding the MODE…
  • Diagnostic ModePress and hold the MODE button, then press the TEMPERATURE UP button
  • Input/Output Status1
  • Input/Output Status Mode1. Press and hold the MODE button (a short beep will sound). 2. Whilst still holding the MODE…
  • Manual Defrost1
  • Manual Defrost Mode1. Press and hold the MODE button (a short beep will sound). 2. Whilst still holding the MODE…
  • Power/Control Module InitialisationWith FC door closed and PC door open, press any button on the user interface in the PC.
  • Power/Control Module InitializationClose the FC door and open the PC door, then press any of the buttons on the user interface in the…
  • Show Room ModeGo into diagnostic mode (press MODE and TEMPERATURE UP buttons together) then hold the TEMPERATURE…
  • Special Option Mode (Israel)Push and hold the compartment select MODE button on the display board for 10 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Fisher & Paykel refrigerator models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax