Model reference
Fisher & Paykel 819091D
Refrigerator
2 documents35 error codes11 service modes
Available documentation
Service Manual
- 819091d---refrig88 pg
- Service Manual RF201A Active Smart USA Refrigerator Freezer88 pg
MyPros+ Max
Diagnose your Fisher & Paykel 819091D.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (35)
CodeMeaning
1On the last power up, the power module failed self-test.10The resistance of the PC sensor is outside the normal range (< 660 Ohms).11The current measured for the ambient heater, PC fan and FC fan is lower than…12The current measured for the ambient heater, PC fan and FC fan is higher than…13The low ambient heater is drawing less current than expected14The low ambient heater is drawing more current than expected15The PC fan is drawing less current than expected16The PC fan is drawing more current than expected17The FC fan is drawing less current than expected18The FC fan is drawing more current than expected2The previous 2 defrosts were aborted after 40 minutes.20Flapper heater current low.21Flapper heater current is high.22The resistance of the PC sensor 2 is outside the normal range (> 45K Ohms)23The resistance of the PC sensor 2 is outside the normal range (< 660 Ohms)24The resistance of the ice tray sensor is outside the normal range (> 45K Ohms)25The resistance of the ice tray sensor is outside the normal range (< 660 Ohms)26Icemaker motor timed out27Icemaker motor current high.28Icemaker solenoid current high.29Icemaker solenoid current low.3The resistance of all the temperature sensors are outside the normal range (>…32Solenoid driver 1 has failed; the product has reverted to Solenoid Driver 2 to…33Solenoid driver 2 has failed; Solenoid Driver 1 may still be operational and…34Both Solenoid Drivers 1 and 2 have been detected to have a fault.4The resistance of all the temperature sensors are outside the normal range (<…5The resistance of the FC sensor is outside the normal range (> 45K Ohms).6The resistance of the FC sensor is outside the normal range (< 660 Ohms).7The resistance of the Evaporator sensor is outside the normal range (> 45K…8The resistance of the Evaporator sensor is outside the normal range (< 660…View all 35 error codes
Service modes (11)
- Data Download ModePress and hold the MENU button, then press the UP button for four seconds (entering diagnostic…
- Diagnostic ModePress and hold the MENU button, then press the UP button for 4 seconds. The PC temperature will be…
- Flowmeter Calibration (Products before January 2009)Press and hold the MEASURED FILL button, then press the DOWN button for 4 seconds
- Forced DefrostPress and hold the MENU button, then press the DOWN button for 4 seconds.
- Forced Icemaker Harvest (Products after January 2009)Press LOCK key first, then DOWN + UP keys and hold all three (3) keys for 4 seconds.
- Forced Icemaker Harvest (Products before January 2009)Press and hold down the MEASURED FILL + UP + DOWN buttons for 4 seconds.
- Input/Output Status ModeEnter Diagnostic Mode (MENU + UP for 4 seconds), then press the UP button three times
- Sabbath Mode (Products after January 2009)Press and hold MENU + DOWN + LOCK for 4 seconds.
- Sabbath Mode (Products before January 2009)Press and hold MENU + MEASURED FILL + DOWN for 4 seconds.
- Show Off Mode (Products after January 2009)Press and hold MENU + DOWN + UP for 4 seconds.
- Show Off Mode (Products before January 2009)Press and hold MENU + DOWN + UP for 4 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Fisher & Paykel refrigerator models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax