mypros+
Model reference

Hotpoint WMT

Washer

2 documents18 error codes24 service modes

Available documentation

Service Manual

  • Home Repair Workshop Manual For Hotpoint WMA Series Washing Machine104 pg
    Covers this model
  • Hotpoint WMA Series Washing Machine Home Repair Workshop Manual104 pg
    Covers this model
MyPros+ Max

Diagnose your Hotpoint WMT.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (18)

CodeMeaning
E12Machine failed to fill with water within the allowed time.E13Pressure switch not registering (no reading from pressure switch circuit).E14Machine failed to heat the water within the allowed time.E15Machine failed to empty/drain water within the allowed time.E17Door interlock not registering (no reading from interlock circuit).E18Drum load is out of balance during spin cycle.E19Faulty power supply to the machine.E20Thermistor (temperature sensor) is faulty.E30Motor related faultE31Motor related faultE32Motor related faultE33Fault on chopper module (PCB).E34Fault on chopper module (PCB).E35Fault in wiring/connection between control module and chopper module.E36Fault in wiring/connection between control module and power module.E37Motor related faultE38Motor related faultE50Wrong model

Service modes (24)

  • Auto Component Test - WMA30/31/32/33["Press and hold Super Rinse & Rinse Hold buttons, turn dial to D.","Hold for about 5 seconds until…
  • Auto Component Test - WMA34-58 series["Press and hold Extra Rinse & Rinse Hold buttons, turn dial to D.","Hold for about 5 seconds until…
  • Auto Component Test - WMA5["Start with dial at OFF.","Press and hold Half Load & Economy buttons, turn dial to D.","Hold…
  • Auto Component Test - WMA60/61/62/63/64/66/74/76 (Digital Display)["Cancel all programmes and turn the machine off.","Switch the machine off at the mains (wall…
  • Auto Component Test - WMA9/10/11/12/13/20/22["Start with dial at OFF.","Press and hold Energy Save & Rinse Hold buttons, turn dial to D.","Hold…
  • Component test (Auto) - WMA30/31/32/33["Press and hold Super Rinse & Rinse Hold buttons, then turn dial to D.","After about 5 seconds…
  • Component test (Auto) - WMA34-58 series["Press and hold Extra Rinse & Rinse Hold buttons, then turn dial to D.","After about 5 seconds…
  • Component test (Auto) - WMA5["Start with dial at OFF.","Press and hold Half Load & Economy buttons, then turn dial to…
  • Component test (Auto) - WMA60/61/62/63/64/66/74/76 (Digital Display)["Cancel all programmes and turn the machine off.","Switch the machine off at the mains (wall…
  • Component test (Auto) - WMA9/10/11/12/13/20/22["Start with dial at OFF.","Press and hold Energy Save & Rinse Hold buttons, then turn dial to…
  • Component test (Manual) - WMA30/31/32/33["Set selector to OFF.","Press and hold Super Rinse and Rinse Hold buttons for 5 seconds whilst…
  • Component test (Manual) - WMA34-58 series["Set selector to OFF.","Press and hold Extra Rinse and Rinse Hold buttons for 5 seconds whilst…
  • Component test (Manual) - WMA5["Set selector to OFF.","Press and hold Half Load and Economy buttons for 5 seconds whilst turning…
  • Component test (Manual) - WMA9/10/11/12/13/20/22["Set selector to OFF.","Press and hold Rinse Hold and Energy Save buttons for 5 seconds whilst…
  • Manual Component Test - WMA30/31/32/33["Set selector to OFF.","Press and hold Super Rinse and Rinse Hold buttons for 5 seconds whilst…
  • Manual Component Test - WMA34-58 series["Set selector to OFF.","Press and hold Extra Rinse and Rinse Hold buttons for 5 seconds whilst…
  • Manual Component Test - WMA5["Set selector to OFF.","Press and hold Half Load and Economy buttons for 5 seconds whilst…
  • Manual Component Test - WMA9/10/11/12/13/20/22["Set selector to OFF.","Press and hold Rinse Hold and Energy Save buttons for 5 seconds whilst…
  • Module Configuration - WMA30/31/32/33["Start with selector at O (off).","Turn selector to K while pressing Super Rinse & Rinse Hold…
  • Module Configuration - WMA34/35/36/37["Start with selector at O (off).","Turn selector to K while pressing Extra Rinse & Rinse Hold…
  • Module Configuration - WMA40/42/44/46/48/57["Start with selector at OFF.","Turn selector to K while pressing Extra Rinse & Rinse Hold. Hold…
  • Module Configuration - WMA5["Start with selector at OFF position.","Turn selector to K while pressing Half Load & Economy…
  • Module Configuration - WMA50/52/54/56/58["Start with selector at OFF.","Turn selector to K while pressing Extra Rinse & Rinse Hold. Hold…
  • Module Configuration - WMA9/10/11/12/13/20/22["Start with selector at OFF position.","Turn selector to K while pressing Rinse Hold & Energy…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Hotpoint washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass