Model reference
Jenn-Air JGW8130DDB
Oven
3 documents19 error codes15 service modes
Available documentation
Tech Sheet
- Tech Sheet - 16022515F (FR)12 pg
Service Manual
- Service Manual - 1602251460 pg
Other
- Jenn Air60 pg
MyPros+ Max
Diagnose your Jenn-Air JGW8130DDB.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (19)
CodeMeaning
1c1cShorted key detected1c31Cancel key circuit failure1c4cMicro communication failure1c5cVcc or ground fault at test point during cook or clean cycle.1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway oven temperature detected while door is unlocked (sensor resistance >…1d21Runaway oven temperature detected while door is locked (sensor resistance >…3d11Oven temperature sensor open circuit detected during cook or clean cycle.3d21Oven temperature sensor shorted circuit detected during cook or clean cycle.4d11Door switch input circuit failure detected during clean cycle.4d21No cooling fan rotation (no RPM) detected during cook or clean cycle.9d11Door latch will not lock when clean cycle is activated.9d21Door latch will not unlock when it should be unlocked.9d31Unlock state unknown9d41Unlock condition9d51Lock and unlock state unknown9d61Door position switch open circuit detected during clean cycle.Service modes (15)
- 12/24 Hour Clock TogglePress and hold CANCEL and FAVORITE simultaneously for 3 seconds.
- 24 Hour Clock Toggle["Press and hold CANCEL and FAVORITE pads for 3 seconds."]
- Child Lockout["Press and hold CANCEL and COOK & HOLD pads for 3 seconds.","OFF will display where the…
- Child Safety LockPress and hold CANCEL and COOK & HOLD simultaneously for 3 seconds
- Clock Display Toggle["Press and hold CANCEL and CLOCK pads for 3 seconds."]
- Clock Display Toggle (On/Off)Press and hold CANCEL and CLOCK pads for 3 seconds to toggle clock display on or off.
- Diagnostic Code DisplayEnter Quick Test Mode (CANCEL + BROIL for 3 seconds), then press COOK & HOLD to display last…
- Diagnostic Code Display Mode["Press and hold the AUTOSET (0) pad.","While holding AUTOSET pad, power up the unit.","Cycle…
- Factory Default Reset["Press and hold CANCEL and KEEP WARM pads for 3 seconds."]
- Oven Temperature Adjustment["Press the BAKE pad.","Enter 550 on the number pads.","Immediately press and hold the BAKE pad for…
- Quick Test Mode["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once control enters Quick…
- Sabbath Mode["Press and hold CLOCK button for 3 seconds to activate Sabbath Mode.","SAb will be displayed and…
- Temperature Calibration Adjustment1
- Temperature Display (F/C toggle)Press and hold CANCEL and BAKE simultaneously for 3 seconds.
- Temperature Display Toggle (F/C)["Press and hold CANCEL and BAKE pads for 3 seconds."]
Full entry steps, exit procedures, and test sequences are available in Max.
Related Jenn-Air oven models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass