Model reference

Samsung RF4289HARS/XAA-0000

Refrigerator

2 documents24 error codes6 service modes

Available documentation

Tech Sheet

Fast Track Troubleshooting8 pg
Covers this model
Fast Track Troubleshooting7 pg
Covers this model

MyPros+ Max

Diagnose your Samsung RF4289HARS/XAA-0000.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Samsung Refrigerator

1 on my Samsung RF4289HARS/XAA-0000

M+

Freezer sensor reads open or shorted.

From Service Manual 349891, p.23:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part DA92-00384N

Main PCB assembly

Error codes (24)

CodeMeaning

1Freezer sensor reads open or shorted.13Humidity sensor reads open or shorted.14Ice maker sensor reads open or shorted.15Ice room sensor reads open or shorted.2Refrigerator sensor reads open or shorted.21Freezer fan has either stopped or there is an open connection.22Refrigerator fan has either stopped or there is an open connection.23Compressor fan has either stopped or there is an open connection.24Freezer defrost heater measures an open circuit or the defrost heater has…25Refrigerator defrost heater measures an open circuit or the defrost heater has…39Ice maker heater measures an open circuit.4Freezer defrost sensor reads open or shorted.40Ice room fan has either stopped or there is an open connection.41Communication error between MICOM MAIN and PANEL when communication is not…5Refrigerator defrost sensor reads open or shorted.6Ambient sensor reads open or shorted.7Flex sensor reads open or shorted.81The compressor did not start properly; check for open windings at the…82Fault in the Wireless circuit (IPM fault).83An over current condition was detected at the compressor.84Compressor is not pumping refrigerant properly; possible restriction in the…85Compressor is operating at a high RPM (over RPM error).86Compressor is operating at a low voltage; verify the DC voltage from the Main…87Compressor is operating at a high voltage; verify the DC voltage from the Main…

Service modes (6)

Engineer Mode["Within 3 seconds, press the upper left and upper right corners alternately (A-B-A-B-A-B) until…
Engineer Mode (Diagnostic and Forced Operation)1
Ice Maker Test ModePress and hold the ICE TEST S/W for at least 1.5 seconds to start the harvest function.
Sales ModePress the Settings Icon on the screen, scroll to the second page of the menu and toggle the setting…
Sales Mode (Cooling Off)["Press the settings icon on the screen.","Scroll to the second page of the menu.","Toggle the…
Self Diagnostic Mode1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Samsung refrigerator models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass