mypros+
Model reference

Whirlpool KGRS306BSS1

Range

12 documents29 error codes19 service modes

Available documentation

Tech Sheet

  • Tech Sheet - W10478483 - Rev B8 pg
    Covers this model
  • Tech Sheet - W10538800 - Rev A (FR)8 pg
    Covers this model
  • W10538799 - Rev A8 pg
    Covers this model
  • Tech Sheet - W10478484 - Rev B (FR)8 pg
    Covers this model

Service Flash

  • Service Pointer - W10701463 (Clock Display Frozen)3 pg
    Covers this model
  • Whirlpool Range Service Pointer W10702913A Revised6 pg
    Covers this model
  • Service Pointer - W10702913 - Rev A (Bake Burner May Not Ignite)6 pg
    Covers this model

Tech Tip

  • Instruction Sheet4 pg
    Covers this model

Installation Guide

  • Installation Instructions40 pg
    Covers this model
  • Instruction Sheet2 pg
    Covers this model

Quick Reference

  • Quick Reference Manual2 pg
    Covers this model
  • Oven Cleaning Quick Reference Guide2 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool KGRS306BSS1.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (29)

CodeMeaning
F1-E0Sensor out of range.F1-E1Board thermistor open or short-circuited.F1-E2WIDE queue full.F1-E5Sensor out of range.F1-E7Board thermistor open or short-circuited.F1-E9EEPROM communication error.F1E0EEPROM communication error.F1E5Sensor out of range.F1E7PCB thermistor open or shorted.F1E9WIDE queue full.F2-E0Keypad disconnected.F2-E1Stuck key.F2-E2Cancel key error.F2-E5Cancel key error (variant).F2-E7Cancel key error (variant).F2E0Keypad disconnected.F2E1Stuck key.F2E2Cancel key error.F3-E0Main oven sensor open or short-circuited.F3-E2Warming drawer sensor open or short-circuited (on some models).F3E0Main oven sensor open or shorted.F3E2Warming drawer sensor open or shorted (on some models).F5-E0Door and door switches mismatch.F5E0Door and door switch do not agree.F6-E1Bake excessive temperature.F6-E2Warming drawer excessive temperature.F6-E3Warm drawer excessive temperature.F6E1Over temperature during cook cycle.F6E3Over temperature in warming drawer.

Service modes (19)

  • Auto TestEnter Diagnostics Mode (CANCEL > CANCEL > START), then press the up arrow, '+' key, or '3' key to…
  • Diagnostic/Troubleshooting Mode (MRC2)Press CANCEL > CANCEL > START
  • Diagnostics Mode (MRC2 Control)Press CANCEL > CANCEL > START
  • DISPLAYEnter Diagnostics Mode, scroll to service mode 5 (DISPLAY).
  • ENG MODEEnter Diagnostics Mode, scroll to service mode 2 (ENG MODE)
  • ENG MODE (Engineering Mode)Enter diagnostic mode, scroll to mode 2 (ENG MODE)
  • FAULTSEnter Diagnostics Mode, scroll to service mode 7 (FAULTS).
  • MRC2 Diagnostic/Service ModePress CANCEL > CANCEL > START
  • RELAY USAGEEnter Diagnostics Mode, scroll to service mode 8 (RELAY USAGE).
  • Temperature Adjustment (MRC2 Controls)Step 1
  • Temperature Calibration AdjustmentPress and hold OVEN LIGHT for 5 seconds
  • Temperature Offset AdjustmentPress and hold OVEN LIGHT for 5 seconds
  • TEST MODEEnter Diagnostics Mode, scroll to service mode 3 (TEST MODE)
  • TEST MODE (Relay Control)From service mode, scroll to step 3 (TEST MODE)
  • TEST ON (Relay Checks)Enter Diagnostics Mode (CANCEL > CANCEL > START)
  • TEST ON (Relay Control from entry)Displayed immediately upon entering service mode (CANCEL>CANCEL>START)
  • TEST ON (Relay Control)Enter diagnostic mode (CANCEL>CANCEL>START)
  • USAGEEnter Diagnostics Mode, scroll to service mode 1 (USAGE).
  • VERSIONEnter Diagnostics Mode, scroll to service mode 4 (VERSION).

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass