Model reference
Whirlpool SF372BEEN0
Range
6 documents27 error codes8 service modes
Available documentation
Tech Sheet
- TECH SHEET4 pg
Service Manual
- SERVICE MANUAL for the FREESTANDING SELF-CLEAN GAS RANGE112 pg
- Failure Codes and Wiring Diagrams for Freestanding Gas & Electric Ranges64 pg
- Super Capacity 465 Freestanding Gas & Electric Ranges Job Aid32 pg
- Super Capacity 465 Freestanding Gas & Electric Ranges Job Aid32 pg
Installation Guide
- Installation Instructions9 pg
MyPros+ Max
Diagnose your Whirlpool SF372BEEN0.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
E1Oven temperature sensor shortedE2Oven temperature sensor openF1Analog to Digital failure or Safety Flip Flop failure (covers F1 E0, F1 E1, F2…F1 E0Analog to Digital failure.F1 E1Safety Flip Flop failure.F1-E0EEPROM communications error.F1-E1UL A/D error(s).F1-E2EEPROM checksum failure.F2 E0Analog to Digital or Safety Flip Flop related failure.F2-E0Shorted keypad or keypad cable unplugged.F2-E1Shorted keypad or keypad cable unplugged.F3Shorted Keypad (F3 E0 on 4-digit display).F3 E0Shorted Keypad.F3 E1Sensor Opened.F3 E2Sensor Shorted.F3 E3Oven Over Temperature Limits.F3-E0Oven sensor opened.F3-E1Oven sensor shorted.F3-E2Bake range overtemperature.F3-E3Clean range overtemperature.F5Clean Range Over Temperature or Door/Latch related failure (covers F5 E0, F5…F5 E0Door and Latch Switches Do Not Agree (i.e., Door Open Latch Closed).F5 E1Latch or Latch Switch Failure During Clean.F5 E2Door Lock Error.F5-E0Door and latch switches do not agree.F5-E1Solenoid not operating or latch switch failurePFPower failure has occurred.Service modes (8)
- Adjustable Audible SignalPress and hold STOP TIME for 5 seconds.
- Bake Temperature Adjustment (Knob Control)1. Turn Oven Temperature Control knob to OFF. Pull knob straight up and off. Hold knob upside down…
- Bake Temperature Adjustment (Touch Control)Press and hold BAKE pad for four (4) seconds. Current offset, if any, is shown in 3-digit display…
- Child LockoutPress and hold START for 5 seconds.
- Clock DisablePress and hold CLOCK for 5 seconds.
- Demo FeaturePress and hold TIMER SET for 5 seconds.
- Fahrenheit/Celsius ConversionPress and hold CUSTOM BROIL for 5 seconds.
- Temperature Adjustment (Calibration)Press and hold BAKE for 4 seconds, then press TEMP UP or DOWN arrow, then press START.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass