mypros+
Model reference

Whirlpool WFG550S0HV3

Range

9 documents18 error codes9 service modes

Available documentation

Tech Sheet

  • Tech Manual24 pg
    Covers this model
  • Tech Sheet - W11382316 - Rev A2 pg
    Covers this model
  • Fiche technique - Tech Sheet W105387948 pg
    Covers this model
  • Tech Sheet - W10538793 - Rev A8 pg
    Covers this model
  • Whirlpool WFG520S0 Gas Range Tech Sheet8 pg
    Covers this model

Service Manual

  • SERVICE MANUAL - Whirlpool®, Maytag®, Amana®, & IKEA® Ranges89 pg
    Covers this model
  • SERVICE MANUAL - Whirlpool®, Maytag®, Amana®, & IKEA® Ranges85 pg
    Covers this model
  • SERVICE MANUAL - Whirlpool®, Maytag®, Amana®, & IKEA® Ranges85 pg
    Covers this model

Service Flash

  • Technical Service Pointer - W11543390 - Rev A - Freestanding Gas Range3 pg
    Covers this model
MyPros+ Max

Diagnose your Whirlpool WFG550S0HV3.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (18)

CodeMeaning
F1Internal board failure (LCC 90/95 display).F1E0Internal board failure.F1E1Internal board failure (A/D Error).F1E2Internal board failure (A/D Error).F2Shorted key (LCC 90/95 display).F2E0Shorted key.F2E1Shorted keypad.F3Oven sensor opened or shorted (LCC 90/95 display).F3E0Oven sensor opened.F3E1Oven sensor shorted.F3E2BAKE/BROIL range over temperature.F3E3CLEAN range over temperature.F5Door and door position switches do not agree or door latch not operating in…F5E0Door and door position switches do not agree (Clean mode).F5E1Door latch not operating (Clean mode).F5E2Door and door position switches do not agree (Clean mode).F6E1Oven over temperature when heating.F9E0Miswired house or miswired range.

Service modes (9)

  • diagnosticPress CANCEL > CANCEL > START within 5 seconds.
  • diagnostic_test_modeAfter entering diagnostic mode (CANCEL>CANCEL>START), the initial display shows 'tSt' (LCC 90/95)…
  • Diagnostics ModePress CANCEL > CANCEL > START within a 5-second period.
  • Diagnostics Mode (All LCX/LCC Controls)Press CANCEL > CANCEL > START within a 5-second period.
  • Diagnostics Test Mode (All LCX/LCC Controls)After entering Diagnostics mode (CANCEL>CANCEL>START), press specific keypads to test individual…
  • Diagnostics Test Mode (relay checks)While in Diagnostics mode
  • Service Diagnostic ModePress CANCEL > CANCEL > START within a 5 second period.
  • Temperature Adjustment1
  • Temperature Adjustment ModeStep 1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass