GE Washer Error Code E10

E10 on a GE washer indicates a motor communication interface problem, meaning the main control board and the inverter board are not communicating properly. The inverter board controls motor speed, so this communication failure causes the washer to stop operation and display the fault. Resolving the error requires inspecting the wiring between the two boards or replacing one of the control components.

You should not continue running the washer while E10 is active. The fault indicates the motor control system is not communicating correctly, and running the machine in this state could result in unpredictable motor behavior or further damage to the control boards. It is best to address the error before using the appliance again.

Repair costs vary depending on which component is at fault. If the issue is simply a loose connector, there may be no parts cost, only a service call fee if a technician is involved. Replacing a main control board or inverter board typically involves parts costs ranging from around $75 to $250 or more depending on the specific model, plus labor if a professional performs the repair.

Some cases of E10 can be resolved without professional help by checking the wiring harness and reseating the connectors between the main control board and the inverter board. If the connectors are secure and the wiring looks intact, you can clear the code and run a test cycle to see if the fault returns. If E10 comes back after that, replacing the main control board or inverter board is the next step and typically requires more comfort with appliance disassembly.

Clearing the error code is part of the diagnostic process, but a reset alone will not fix the underlying problem. If the wiring issue or board fault is still present, E10 will return once a cycle is run. A reset is useful for confirming whether the fault is intermittent or persistent after repairs have been made.