mypros+
Model reference

GE SPBD880J

Washer

3 documents27 error codes7 service modes

Available documentation

Service Manual

  • Profile SmartDispense Pedestal Technical Service Guide27 pg
    Covers this model
  • Profile HA Washer Service Manual75 pg
    Covers this model

Tech Tip

  • WPDH8800J Profile Washer / SPBD880J Pedestal1 pg
    Covers this model
MyPros+ Max

Diagnose your GE SPBD880J.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (27)

CodeMeaning
E1Internal problem with UI or MC board EEPROM.E10Communication problem between Machine Control and Motor Drive.E11Door lock assembly problem.E12Door unlock assembly problem.E13Door open problem.E14Overflow errorE15Open circuit in any of three motor phases detected; no speed info present and…E16Motor drive operation above design limits (over trip).E17Motor drive internal ADC fault event.E18Motor drive heat sink over temperature.E19Motor over temperature.E2Internal problem with Power EEPROM or MC board.E20Motor drive overload current detected.E21Motor drive overload power detected.E22Motor drive internal problemE23Motor drive internal problemE24Motor drive internal problemE25Motor drive internal problemE26LIN communication fault between the Machine Control and the User Interface…E28Unexpected door unlock detected.E3Inverter EEPROM fault eventE4Water temperature sensor problemE5Water temperature sensor problemE6Water level sensor (pressure switch) problem.E7Slow fillE8Drain system problemE9Dispenser motor problem.

Service modes (7)

  • Demo ModeUnplug washer
  • Service ModeWith the unit in idle (blue screen is blank), press
  • Service Test Mode["Machine must be in idle mode (blue screen is blank)
  • t16 Bulk Pumps Test["Enter Service Test Mode.","Scroll to t16.","Press ENTER
  • t17 Bulk Sensors Test["Enter Service Test Mode.","Scroll to t17.","Press ENTER
  • t19 Bulk Manual Priming["Enter Service Test Mode.","Scroll to t19.","Press ENTER
  • t20 Bulk Primed Status["Enter Service Test Mode.","Scroll to t20.","Press ENTER

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass