mypros+
Model reference

GE PFWS4600L0WW

Washer

1 document27 error codes2 service modes

Available documentation

Service Manual

  • Profile Front Load Washer Technical Service Guide67 pg
    Covers this model
MyPros+ Max

Diagnose your GE PFWS4600L0WW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (27)

CodeMeaning
E1Internal problem with the User Interface EEPROM on the UI board.E10Communication problem between main control and inverter (motor comm interface).E11Door lock assembly problem; door failed to lock.E12Door unlock assembly problem; door failed to unlock.E13Door open detected unexpectedly during cycle.E14Overflow error; overflow water level was reached.E15Open circuit in any of three motor phases detected; no speed info present and…E16Over trip; inverter operation above design limits.E17ADC fault event; inverter internal problem.E18Heatsink over temperature; inverter operation above design limits.E19Motor over temperature; inverter operation above design limits.E2Internal problem with the Power Board EEPROM on the MC board.E20Overload current; inverter operation above design limits.E21Overload power; inverter operation above design limits.E22Over volts; inverter internal problem.E23Under volts; inverter internal problem.E24Under volts after start; inverter internal problem.E25Power up fault event; inverter internal problem.E26LIN communication failure between Main Control and User Interface Control.E28Unexpected door unlock detected; door lock assembly problem.E3Inverter EEPROM fault event; inverter internal problem.E4Thermistor short circuit detected; water temperature sensor problem.E5Thermistor open circuit detected; water temperature sensor problem.E6Pressure switch / water level sensor problem.E7Slow fill; fill problem detected.E8Drain system problem.E9Dispenser motor problem.

Service modes (2)

  • Demo Mode["Turn off the unit.","Open the door.","Wait 30 seconds.","Restore power to washer.","Press…
  • Service Test Mode["Press Power button to clear any current cycles (display must be blank/idle mode).","Press Extra…

Full entry steps, exit procedures, and test sequences are available in Max.

Related GE washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass