Whirlpool Oven Error Code 32

Error code 32 on a Whirlpool oven signals an EEPROM communications error, which is an internal control error. The EEPROM is a memory chip on the control board that stores calibration and operational data. When the board's processor cannot communicate with this chip, it logs code 32. The error can be transient or indicate a failing control board.

Error code 32 is an internal memory communication error, not a heat-related or gas safety fault. However, a malfunctioning control board may not accurately manage oven functions, which could affect cooking performance or cause unexpected behavior. It is best to clear the error and verify normal operation before relying on the oven for continued use.

A hard reset by cutting power at the breaker can sometimes clear a transient EEPROM communications error, similar to pressing the CANCEL key. However, the recommended procedure is to first verify the fault through Engineering Mode and then use the CANCEL key to clear it. If the error reappears after either type of reset, the control board likely has a hardware fault that resetting alone will not fix.

Pressing the CANCEL key is the recommended first step to clear error code 32, and it may resolve the issue if the fault was caused by a temporary power glitch or a one-time communication failure. If the error returns after clearing it, the control board or its EEPROM is likely damaged and will need replacement. Always use Engineering Mode first to confirm the error is active before clearing it.

If the error clears with the CANCEL key and does not return, there is no repair cost. If the control board requires replacement, parts typically range from $150 to $400 depending on the specific model, with professional labor adding $100 to $200 or more. Diagnosing whether the board is truly faulty before ordering parts can help avoid unnecessary expenses.