mypros+
Model reference

Bosch WFMC6401UC/06

Washer

3 documents67 error codes4 service modes

Available documentation

Service Manual

  • WFMC/WFXD Service Tips – Test Program17 pg
    Covers this model
  • WFMC/WFXD Service Tips – Test Program17 pg
    Covers this model

Other

  • BSHErrorCodes60 pg
    Covers this model
MyPros+ Max

Diagnose your Bosch WFMC6401UC/06.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (67)

CodeMeaning
d:01Motor control short circuited.d:02Motor control interruption.d:03Damaged motor control temperature sensor.d:06NTC relay failured:07Motor control (inverter) failed or motor shorted.d:08Motor speed sensor failed.d:09Voltage too high at motor control.d:10Power limiter switch offd:11Voltage too low at motor control.d:12Motor control high current switch offd:13Motor control high temperature switch offd:14Motor control high temperature warningd:15Power limiter warningd:16Motor high temperature switch offd:17Motor high temperature warningd:18Peak voltage too high.dr:01Motor control short circuited.dr:02Motor control interruption.dr:03Damaged motor control temperature sensor.dr:06NTC relay failuredr:07Motor control (inverter) failed or motor shorted.dr:08Motor speed sensor failed.dr:09Voltage too high at motor control.dr:10Power limiter switch offdr:11Voltage too low at motor control.dr:12Motor control high current switch offdr:13Motor control high temperature switch offdr:14Motor control high temperature warningdr:15Power limiter warningdr:16Motor high temperature switch off
View all 67 error codes
dr:17Motor high temperature warningdr:18Peak voltage too high.E:01Door open during wash cycle.E:03Door lock doesn't unlock.E:04Door lock doesn't lock.E:05Door control brokenE:06NTC open-circuited.E:07NTC shorted.E:08Unexpected heatingE:09Heater doesn't shut off.E:12Communication lost to motor.E:13Flow meter gives wrong values.E:14No water flow within 6 minutes.E:20Water supply time exceeded.E:21Drain pump time exceeded.E:22Overflow level exceeded.E:24Spinning aborted due to unbalanced load.Er:01Door open during wash cycle.Er:02Door lock doesn't unlock.Er:03Door lock doesn't lock.Er:04Door control brokenEr:05NTC open-circuited.Er:06NTC shorted.Er:07Unexpected heatingEr:08Heater doesn't shut off.Er:09Communication lost to motor.Er:10Flow meter gives wrong values.Er:11No water flow within 6 minutes.Er:12Pressure sensor gives failure voltage level.Er:13Cannot calibrate pressure sensor.Er:14Excessive foam detected.Er:15Spinning aborted due to unbalanced load.Er:16Faulty control moduleEr:20Water supply time exceeded.Er:21Drain pump time exceeded.Er:22Overflow level exceeded.Er:24Motor power relay failed

Service modes (4)

  • WFMC32/WFXD52 Test Program["Rotate cycle selector knob to Off position to reset.","Push and hold Spin Selection and Delay…
  • WFMC32/WFXD52 Test Program (Diagnostic Mode)["Rotate cycle selector knob to Off position to reset.","Push and hold Spin Selection and Delay…
  • WFMC64/WFXD84 Test Program["Rotate cycle selector knob to Off position to reset.","Push and hold Menu and Select buttons at…
  • WFMC64/WFXD84 Test Program (Diagnostic Mode)["Rotate cycle selector knob to Off position to reset.","Push and hold Menu and Select buttons at…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Bosch washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass