Model reference
Whirlpool RF368LXPB1
Range
4 documents23 error codes17 service modes
Available documentation
Tech Sheet
- Whirlpool Range RF368LXPS0 Tech Sheet 97562074 pg
Service Manual
- ELECTRIC RANGE Use & Care Guide28 pg
- Job Aid - 8178042 (KR-31)72 pg
- FAILURE CODES AND WIRING DIAGRAMS for WHIRLPOOL AND KITCHENAID SLIDE-IN & FREESTANDING GAS & ELECTRIC RANGES80 pg
MyPros+ Max
Diagnose your Whirlpool RF368LXPB1.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (23)
CodeMeaning
EndEnd of a timed cooking or self-cleaning cycle; the oven has shut off…F0 E0No error(s) found (Good)F1 E0EEPROM communications error.F1 E1EEPROM checksum failure.F1 E2UL A/D error(s).F1 E4Model ID error.F1 E6Latch signal mismatch error.F2 E0Shorted key / Stuck key.F2 E1Keytail unplugged.F3 E0Oven sensor opened.F3 E1Oven sensor shorted.F3 E2BAKE/BROIL range over temperature.F3 E3CLEAN range over temperature.F3 E4Oven sensor openedF3 E5Oven sensor shortedF3 E6Warming drawer sensor open.F3 E7Warming drawer sensor shorted.F5 E0Door and switches do not agree.F5 E1Door latch not operating.F5 E2Latch error during CLEAN.F8 E0Error code listed in tech sheet (no description provided in document).LocControl Lock is engaged; control panel pads are disabled to prevent unintended…PFPower failure has occurred; display shows 'PF' or a flashing time when power is…Service modes (17)
- 12-Hour Shut-Off Toggle (Style 1)["Press and hold DELAY for 5 seconds.","'12 HR SHUT-OFF ON' will appear on the display.","Press and…
- All Tones Toggle (Style 1)["Press and hold CLOCK for 5 seconds.","'ALL SOUNDS OFF' will appear on the display.","Repeat to…
- All Tones Toggle (Style 2)["Press and hold STOP TIME for 5 seconds.","'Snd OFF' will appear on the display.","Press and hold…
- Control Lock["Make sure the oven and Timer are off.","Press and hold the 'Lock' key for 5 seconds.","A single…
- diagnostic test modeWithin 60 seconds of power up, simultaneously hold down the BAKE and CLOCK keys for 5 seconds
- End of Cycle Tones Toggle (Style 1)["Press and hold CONVECT for 5 seconds to turn END OF CYCLE TONES off.","Press and hold CONVECT for…
- Fahrenheit/Celsius Toggle (Style 1)["Press and hold AUTO CLEAN for 5 seconds.","'TEMPERATURE UNIT CELSIUS' will appear in the…
- Fahrenheit/Celsius Toggle (Styles 2 & 3)["Press and hold BROIL for 5 seconds.","Repeat to change back to Fahrenheit."]
- Key Press Tones Toggle (Style 1)["Press and hold WARM (Cooking Options) for 5 seconds.","'KEY PRESS TONES OFF' will appear on the…
- last fault code displayPress and hold CANCEL/OFF key for 5 seconds until last error code is displayed.
- Oven Temperature Calibration Adjustment (Style 1)["Press and hold OVEN LIGHT for 5 seconds until the oven display shows the current calibration…
- Oven Temperature Calibration Adjustment (Styles 2 & 3)["Press and hold BAKE for 5 seconds until the oven display shows the current calibration (e.g…
- Reminder Tones Toggle (Style 1)["Press and hold BAKE for 5 seconds.","'REMINDER TONES OFF' will appear on the display.","Repeat to…
- Reminder Tones Toggle (Style 2)["Press and hold TIMER SET for 5 seconds.","'rEP OFF' or 'OFF' will appear in the display.","Repeat…
- temperature adjustmentPress and hold BAKE pad for 5 seconds. Current offset is shown in 3-digit display. CAL is shown in…
- Tone Pitch Toggle (Style 1)["Press and hold BROIL for 5 seconds.","'TONE PITCH LOW' will appear on the display.","Repeat to…
- Tone Pitch Toggle (Style 2)["Press and hold DELAY START for 5 seconds.","'Snd LO' will appear on the display.","Repeat to…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Whirlpool range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass