Model reference

Whirlpool SF395LEEB0

Name: Whirlpool SF395LEEB0
Brand: Whirlpool

Range

6 documents26 error codes9 service modes

Available documentation

SERVICE MANUAL for the FREESTANDING SELF-CLEAN GAS RANGE112 pg
Covers this model
Super Capacity 465 Freestanding Gas & Electric Ranges Job Aid32 pg
Covers this model
Super Capacity 465 Freestanding Gas & Electric Ranges Job Aid32 pg
Covers this model

MyPros+ Max

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Range

E1 on my Whirlpool SF395LEEB0

M+

Oven temperature sensor shorted —

From Tech Sheet W14629141, p.33:

1.Access service mode to confirm the active fault code and read stored error history.

2.Disconnect the sensor and measure resistance. Expected: 10 kΩ to 12 kΩ at 77°F (25°C).

3.Check the sensor harness for opens. A reading outside 5 kΩ to 50 kΩ indicates a failed sensor.

Part WP8577274

Temperature thermistor

CodeMeaning

Adjustable Audible SignalPress and hold STOP TIME for 5 seconds.
Child LockoutPress and hold START for 5 seconds.
Clock DisablePress and hold CLOCK for 5 seconds.
Demo FeaturePress and hold TIMER SET for 5 seconds.
F5 Failure Code ClearAfter correcting the F5 fault condition, reconnect power to control
Fahrenheit/Celsius ConversionPress and hold CUSTOM BROIL for 5 seconds.
Last Error Code RecallPress and hold CANCEL/OFF key for 5 seconds until last error code is displayed.
Temperature Adjustment (Calibration)Press and hold BAKE for 4 seconds, then press TEMP UP or DOWN arrow, then press START.
Temperature Calibration AdjustmentPress and hold BAKE pad for 5 seconds

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass