mypros+
Error code reference

Amana Dryer Error Code F:73

Console electronics failure.

Amana codesAmana dryer codes

Console electronics failure.

First step from the service manual

Replace the console electronics.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F:73.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What F:73 means on a Amana dryer

The F:73 error code on an Amana dryer indicates a console electronics failure. The console electronics assembly is the main user interface control board, housing the input circuitry, display components, and control logic that allow the dryer to receive cycle selections and communicate operational status. When the dryer's internal diagnostics detect that this assembly is not functioning correctly or communicating as expected, it flags the F:73 fault.

This fault is typically caused by an internal failure within the console electronics board itself. This can include failed solder joints, damaged microprocessor components, corrupted firmware, or compromised circuitry due to power surges or moisture exposure. Because the console electronics handle direct user input and relay commands to the main control system, a failure here can manifest as unresponsive buttons, a blank or incorrect display, or a dryer that fails to start any cycle.

The primary diagnostic step for F:73 is direct replacement of the console electronics assembly. There are no intermediate component-level tests specified for this code. If the dryer has experienced a recent power surge or the display has been acting erratically prior to the fault appearing, this strongly supports an internal console board failure. Replacement of the assembly is the recommended corrective action to restore normal dryer operation.

Source: manufacturer service documentation.

Common causes of F:73

  1. 01

    Failed console electronics board

    Part replacement

    The internal circuitry of the console electronics assembly has failed, which is the most common cause of F:73. This can include damaged microprocessor components, failed solder joints, or corrupted onboard logic.

  2. 02

    Power surge damage

    Part replacement

    A voltage spike from a power surge can permanently damage the sensitive circuitry on the console board. If the fault appeared shortly after a storm or power interruption, surge damage is a likely contributor.

  3. 03

    Moisture or corrosion on the board

    Part replacement

    Exposure to humidity or liquid can cause corrosion on the console board's contacts and circuitry, leading to communication failures. Inspect the board for visible discoloration, rust, or residue if the unit has been in a humid environment.

  4. 04

    Loose or damaged wiring harness connection

    Wiring / connection

    A wiring connector between the console electronics and the main control board may have come loose or suffered damage, causing the system to register a console fault. Check all harness connections to and from the console assembly before replacing the board.

See the test procedure for each cause

Frequently asked questions about F:73

What does F:73 mean on a Amana dryer?
F:73 on an Amana dryer indicates a console electronics failure. This means the dryer's diagnostics have detected a fault in the user interface control board, which handles button inputs and display functions. The console electronics assembly is the component identified as failed and will need to be replaced to resolve the error.
Can I fix the F:73 error myself on my Amana dryer?
The recommended fix for F:73 is replacing the console electronics assembly. A technician or knowledgeable DIYer comfortable with disassembling the control panel and handling electrical components can perform this repair. Before ordering a replacement board, it is worth checking that all wiring harness connections to the console are secure and undamaged.
Will resetting my Amana dryer clear the F:73 error code?
A simple reset is unlikely to permanently clear the F:73 error because it indicates a hardware failure within the console electronics board rather than a temporary software glitch. The fault may reappear immediately or shortly after any reset attempt. The underlying component failure must be addressed by replacing the console electronics assembly.
Is it safe to use my Amana dryer while it shows the F:73 error?
When the F:73 error is active, the dryer may not respond correctly to controls or may not operate at all, making normal use unreliable. It is best to avoid attempting to run the dryer until the console electronics have been replaced, as the control board failure means the machine cannot be trusted to operate as intended.
How much does it cost to fix the F:73 error on an Amana dryer?
The cost to repair the F:73 error depends on whether you hire a technician or perform the repair yourself. A replacement console electronics assembly typically costs somewhere in the range of $75 to $200 for the part alone, depending on the specific model. Adding professional labor costs can bring the total repair estimate to roughly $150 to $350 or more.

Related Amana dryer codes

All Amana dryer codes
View all 38 Amana dryer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass