Skip to main content
Error code reference
Electrolux Freezer Error Codes
18 error codes documented with diagnostic procedures.
Have your model number? Get codes specific to your unit.
All LEDs lit (temperature display)Sensor defect detectedCECommunication error between the user interface (UI) and electronic control unit (ECU).CLCommunication error between main PCB and user interface board.EA malfunction has occurred with the electronic temperature control; freezer will continue…E1Thermistor errorE2Stuck key errorE3Evaporator mounted sensor shorted circuit detected.E5Showroom Mode is active (Precision Set Control)E7Stuck key detected (key pressed for more than 30 seconds); Fail Safe Mode is initiated.E8Thermistor is shorted (short circuit detected on temperature thermistor).E9Thermistor is open (open circuit detected on temperature thermistor).HIFreezer temperature has remained above the safe limit of 23.0°F +/- 3°F for more than 1…P2Primary sensor open circuit detected.P3Primary sensor shorted circuit detected.Red ALARM LED blinking + audible alarmTemperature alarmRed warning LED + yellow freezer LED blinkingEEPROM error detected in the FLEC LCD control board.UIIncorrect user interface board detected.Warning LED blinking + audible alarm (door)Door alarm
Get the full diagnostic procedure for any code
Step-by-step tests, expected values, wiring diagram references, and verified part numbers.
Get Started $9.95 3-day pass$29/month for unlimited access to all brands and Max AI diagnostics.
More Electrolux error codes
Common questions
How do I find the error code on my Electrolux Freezer?
Most Electrolux freezers show the code directly on the control panel display. If your model has no display, it can be read by entering diagnostic mode with the key sequence for your model. The full procedures include model-specific instructions for reading codes.
Are these codes specific to my model?
The codes here apply broadly to Electrolux freezers. Meanings and diagnostic steps can vary by model and production year, so enter your model number for model-specific information and procedures.
What do I do if my code is not listed?
Some codes are model-specific or only appear in diagnostic mode. Enter your model number to get codes specific to your unit, or contact us. We update the database continuously from manufacturer service documentation.
How much does it cost to access the full diagnostic procedures?
A 3-day pass is $9.95 one-time and gives full access to all brands, codes, and procedures. Monthly access is $29/month with unlimited access to everything including Max AI diagnostics.