Frigidaire Dishwasher Error Code Hd

Hd stands for water heat delay on a Frigidaire dishwasher. It indicates that the incoming water temperature was not hot enough when the cycle started, so the dishwasher has paused the timer and is using its internal heating element to warm the water to the required level. The cycle will resume automatically once the water reaches the correct temperature. This code does not always indicate a malfunction.

Resetting the dishwasher may temporarily clear the Hd display, but the code will return if the underlying cause is not addressed. If the issue is simply cold incoming water, priming the hot water line before the next cycle is a more reliable solution. If a component such as the thermistor or heating element is faulty, a reset will not prevent the code from reappearing.

If the issue is just cold incoming water or a low water heater setting, there is no repair cost involved. If a faulty thermistor is the cause, parts and labor typically range from around 75 to 200 dollars depending on your location and service provider. A failed heating element repair generally costs more, with estimates ranging from approximately 150 to 350 dollars for parts and professional labor.

Start by running your kitchen faucet until the water runs hot before starting the dishwasher, which ensures the supply line is primed with hot water. Also verify that your home water heater is set to an adequate temperature, typically around 120 degrees Fahrenheit. If the code persists despite hot incoming water, the temperature sensor or heating element may need to be tested and potentially replaced.

The Hd code is not a safety hazard. It is a built-in feature designed to ensure the dishwasher operates with water at a temperature suitable for effective cleaning and sanitation. The dishwasher will simply delay the cycle until the water is heated adequately. If the code appears constantly and the cycle never proceeds, that could indicate a component failure worth addressing promptly.