Model reference
Fisher & Paykel 22128
Refrigerator
1 document20 error codes8 service modes
Available documentation
Service Manual
- Service Manual ACTIVE SMART Refrigerator/Freezer Ice And Water Models39 pg
MyPros+ Max
Diagnose your Fisher & Paykel 22128.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax
Error codes (20)
CodeMeaning
1On the last power up, the power module failed self test.10The resistance of the FC sensor is outside the normal range (< 660 Ohms).11The current measured for the ambient heater, PC fan and FC fan is lower than…12The current measured for the ambient heater, PC fan and FC fan is higher than…13Low ambient heater is drawing less current than expected14Low ambient heater is drawing more current than expected15PC fan is drawing less current than expected16PC fan is drawing more current than expected17FC fan is drawing less current than expected18FC fan is drawing more current than expected2The previous 2 defrosts were aborted after 30 minutes.3The resistance of all the temperature sensors is outside the normal range (>…4The resistance of all the temperature sensors is outside the normal range (<…5The resistance of the FC sensor is outside the normal range (> 45K Ohms).6The resistance of the FC sensor is outside the normal range (< 660 Ohms).7The resistance of the Evaporator sensor is outside the normal range (> 45K…8The resistance of the Evaporator sensor is outside the normal range (< 660…9The resistance of the PC sensor is outside the normal range (> 45K Ohms).F30No display signal received (shorted or broken wire).F31No display signal received (shorted or broken wire) clock or data line.Service modes (8)
- Data DownloadPress and hold the MENU button, then press the UP button for 4 seconds, then press DOWN button
- Diagnostic ModePress and hold the MENU and UP buttons for 4 seconds. First display shows PC temperature. Press UP…
- Flowmeter Calibration / Measured Fill CalibrationPress and hold the MEASURED FILL button, then press the DOWN button to enter calibration mode
- Force Icemaker Manual HarvestPress and hold the MEASURED FILL + UP + DOWN buttons for 4 seconds.
- Forced DefrostWhile pressing and holding the MENU button, press the DOWN button for 4 seconds.
- Input/Output StatusEnter Diagnostic Mode (MENU + UP for 4 seconds), then press UP button three times.
- Sabbath ModePress and hold MEASURED FILL + MENU + DOWN buttons for 4 seconds.
- Show Off ModePress and hold MENU + DOWN + UP buttons for 4 seconds.
Full entry steps, exit procedures, and test sequences are available in Max.
Related Fisher & Paykel refrigerator models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax