Model reference

Whirlpool WFG381LVS3

Range

6 documents27 error codes6 service modes

Available documentation

Tech Sheet

Tech Sheet - W10198649 - Rev C (FR)8 pg
Covers this model
Tech Sheet - W10198618 - Rev B8 pg
Covers this model
Fiche technique - Tech Sheet W103575188 pg
Covers this model
Tech Sheet - W10357517 - Rev C8 pg
Covers this model

Tech Tip

Instruction Sheet2 pg
Covers this model

Installation Guide

Installation Instructions40 pg
Covers this model

MyPros+ Max

Diagnose your Whirlpool WFG381LVS3.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Whirlpool Range

F1 on my Whirlpool WFG381LVS3

M+

Internal circuit board failure or A/D

From Tech Sheet W13091829, p.41:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (27)

CodeMeaning

F1Internal circuit board failure or A/D error(s).F1-E0Internal board failure.F1-E1Internal board failure.F1E0Internal circuit board failure (LCC 180/190 display).F1E1A/D error (LCC 180/190 display).F1E2A/D error (LCC 180/190 display).F2Shorted key (keypad short circuit).F2-E0Shorted key.F2-E1A/D Error(s).F2-E2A/D Error(s).F2E0Shorted key (LCC 180/190 display).F3Oven sensor—open circuit.F3-E0Oven sensor opened.F3-E1Oven sensor shorted.F3-E2BAKE/BROIL range over temperature.F3-E3CLEAN range over temperature.F3E0Oven sensor—open circuit (LCC 180/190 display).F3E1Oven sensor—short circuit (LCC 180/190 display).F3E2BAKE/BROIL—excessive temperature.F3E3CLEAN—excessive temperature.F5Door and latch switch mismatch (clean mode).F5-E0Door and switches do not agree (Clean mode).F5-E1Door latch not operating (Clean mode).F5-E2Door and switches do not agree (Clean mode).F5E0Door and latch switch mismatch during clean mode (LCC 180/190 display).F5E1Door latch not functioning during clean mode.F5E2Door and latch switch mismatch during clean mode (LCC 180/190 display).

Service modes (6)

diagnosticPress CANCEL > CANCEL > START within 5 seconds.
diagnostic_test_modeAfter entering diagnostic mode (CANCEL>CANCEL>START), the initial display shows 'tSt' (LCC 90/95)…
Diagnostics ModePress CANCEL > CANCEL > START within a 5-second period.
Diagnostics Test Mode (Relay Checks)After entering Diagnostics Mode (CANCEL>CANCEL>START), press individual keys to test relays
Temperature AdjustmentStep 1
Temperature Adjustment ModeStep 1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Whirlpool range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass