mypros+
Error code reference

Maytag Range Error Code F1:8

EEPROM error.

Maytag codesMaytag range codes

EEPROM error.

First step from the service manual

Replace control.

The complete diagnostic procedure includes additional test steps, resistance specifications, wiring diagram references, and component test points.

MyPros+ Max

Get the full diagnostic procedure for F1:8.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What F1:8 means on a Maytag range

The F1:8 error code on a Maytag range indicates an EEPROM (Electrically Erasable Programmable Read-Only Memory) error within the electronic control board. The EEPROM is a small memory chip integrated into the control board that stores critical calibration data, user settings, and operational parameters for the range. When the control board's processor attempts to read from or write to the EEPROM and detects a fault, such as corrupt data, a failed memory cell, or a communication breakdown between the processor and the chip, the F1:8 code is triggered and normal operation is halted.

EEPROM failures can occur due to power surge damage, age-related degradation of the memory chip, or internal failures within the control board's circuitry. Because the EEPROM is soldered directly onto the control board rather than being a separately serviceable component, a failure of this chip typically renders the entire control board non-functional for reliable operation. Intermittent voltage fluctuations from the home's electrical supply can also corrupt stored memory data, causing the error to appear suddenly.

The recommended diagnostic step for this code is direct replacement of the electronic control board. There is no field-level procedure for reprogramming or repairing the EEPROM itself. Attempting to continue operating the range with this error present is not advisable, as corrupted control data can cause unpredictable behavior from the oven or surface elements.

Source: manufacturer service documentation.

Common causes of F1:8

  1. 01

    Failed EEPROM chip on the control board

    Part replacement

    The memory chip on the control board has degraded or failed internally, which is the most direct cause of the F1:8 code. Because the chip is not separately replaceable in the field, the entire control board must be replaced.

  2. 02

    Power surge or voltage spike damage

    Part replacement

    A surge from the home's electrical supply can corrupt or permanently damage the EEPROM's stored data or the chip itself. Check whether the error appeared after a power outage or electrical event.

  3. 03

    Corrupted EEPROM data

    Part replacement

    Even without a physical chip failure, the data stored in the EEPROM can become corrupted over time or due to interrupted write cycles, causing the processor to fault. This condition cannot be resolved by resetting the range.

  4. 04

    Age-related control board failure

    Part replacement

    Electronic components on the control board, including memory chips, degrade over years of use and heat cycling. Older ranges are more susceptible to this type of internal board failure.

See the test procedure for each cause

Frequently asked questions about F1:8

What does F1:8 mean on a Maytag range?
F1:8 on a Maytag range indicates an EEPROM error, meaning the memory chip on the electronic control board has failed or contains data the board cannot read correctly. The EEPROM stores calibration and operational settings that the board needs to function. This is an internal control board fault, and the board will need to be replaced to resolve it.
Can I fix the F1:8 error myself on my Maytag range?
The fix for F1:8 is replacement of the electronic control board, which is a repair that a confident DIYer with appliance experience can attempt. The control board is typically accessible after removing the back panel or console of the range. However, working near high-voltage components requires caution, and if you are not comfortable with appliance electrical repairs, a professional technician is the safer option.
Is it safe to use my Maytag range while the F1:8 code is showing?
It is not advisable to continue using the range with an active F1:8 error. A corrupted or failed EEPROM can cause the control board to behave unpredictably, which may result in improper temperature regulation or unintended element activation. Discontinuing use until the control board is replaced is the recommended course of action.
How much does it cost to repair an F1:8 error on a Maytag range?
The cost to repair this error depends primarily on the price of the replacement control board, which typically ranges from $150 to $400 or more depending on the specific model. If you hire a technician, labor costs will add roughly $100 to $200 on top of the part price. DIY replacement of the control board can reduce the total cost significantly.
Will resetting my Maytag range clear the F1:8 error code?
Resetting the range by cutting power at the breaker or unplugging it may temporarily clear the display, but the F1:8 error will return if the EEPROM or control board is genuinely faulty. Because this error reflects a hardware or data integrity failure within the board itself, a power reset does not address the underlying problem. Replacement of the control board is the only reliable resolution.

Related Maytag range codes

All Maytag range codes
View all 106 Maytag range codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass